Hi
Any advice, tips and/or tricks for fitting new carpets to SP250 please?
Many thanks
Wayne
Please visit the Club's website https://www.dloc.org.uk/ to join. Visit https://www.dloc.org.uk/adhoc to DONATE towards the cost of the forum.
Please don't post someone's email address to avoid it being harvested by spambots and it's against GDPR regulations.
Always look at "ACTIVE TOPICS" to see all posts in date & time order as they are sometimes moved; or look at "Your Posts".
Please add Reg. nrs. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.
CHANGED YOUR EMAIL ADDRESS since registering?, click your username and check your address in User Control Panel, Profile, Account Settings.
If you want help to register, use "contact us" at page bottom for help.
Please don't post someone's email address to avoid it being harvested by spambots and it's against GDPR regulations.
Always look at "ACTIVE TOPICS" to see all posts in date & time order as they are sometimes moved; or look at "Your Posts".
Please add Reg. nrs. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.
CHANGED YOUR EMAIL ADDRESS since registering?, click your username and check your address in User Control Panel, Profile, Account Settings.
If you want help to register, use "contact us" at page bottom for help.
Search found 34 matches
- Thu Apr 30, 2020 12:23 pm
- Forum: Daimler SP250/251, 2.5 V8 & V8-250 Saloon Forum
- Topic: SP250 Carpet Fitting
- Replies: 8
- Views: 1503
- Mon Jan 27, 2020 8:34 pm
- Forum: Daimler SP250/251, 2.5 V8 & V8-250 Saloon Forum
- Topic: Wiring harness routing SP250 B type LHD
- Replies: 19
- Views: 4100
Re: Wiring harness routing SP250 B type LHD
Ok, thanks Ian. I will get creative and rise to the challenge.
- Mon Jan 27, 2020 12:01 pm
- Forum: Daimler SP250/251, 2.5 V8 & V8-250 Saloon Forum
- Topic: Wiring harness routing SP250 B type LHD
- Replies: 19
- Views: 4100
Re: Wiring harness routing SP250 B type LHD
Hi Ian
Your response to my last question was excellent thank you. One more question I have is; if mice have built their nest in the cull itself, how would I ensure I get that nest out? Do you have any experience/knowledge regards this please?
Many thanks
Wayne
Your response to my last question was excellent thank you. One more question I have is; if mice have built their nest in the cull itself, how would I ensure I get that nest out? Do you have any experience/knowledge regards this please?
Many thanks
Wayne
- Fri Jan 24, 2020 10:14 pm
- Forum: Daimler SP250/251, 2.5 V8 & V8-250 Saloon Forum
- Topic: Wiring harness routing SP250 B type LHD
- Replies: 19
- Views: 4100
Re: Wiring harness routing SP250 B type LHD
Hi Ian
Wow! Thank you for such a detailed response, it is much appreciated. I will make a start on finding the problem and let you know how it goes.
Thanks a million.
Wayne
Wow! Thank you for such a detailed response, it is much appreciated. I will make a start on finding the problem and let you know how it goes.
Thanks a million.
Wayne
- Wed Jan 22, 2020 1:14 pm
- Forum: Daimler SP250/251, 2.5 V8 & V8-250 Saloon Forum
- Topic: Wiring harness routing SP250 B type LHD
- Replies: 19
- Views: 4100
Re: Wiring harness routing SP250 B type LHD
I have just recently completed this job but luckily I had the foresight to attach a mousing wire when the old loom was pulled out so the new cables went in quite easily along the sill. The hardest bit was getting the cable over the mudguard and into the boot, even with the mouse wire, but with much...
- Sat Jul 06, 2019 8:13 am
- Forum: Daimler SP250/251, 2.5 V8 & V8-250 Saloon Forum
- Topic: Removal of float arm from SP250 petrol tank sender.
- Replies: 10
- Views: 2134
Re: Removal of float arm from SP250 petrol tank sender.
Hi Guys
I have managed to remove the float after a bit of persuasion. Thank you for your comments and advice.
I have managed to remove the float after a bit of persuasion. Thank you for your comments and advice.
- Wed Jul 03, 2019 7:55 am
- Forum: Daimler SP250/251, 2.5 V8 & V8-250 Saloon Forum
- Topic: Removal of float arm from SP250 petrol tank sender.
- Replies: 10
- Views: 2134
Re: Removal of float arm from SP250 petrol tank sender.
Hi Guys
I have removed the tank itself and taken out the old sender. I can not remove the arm itself from the little hole into which it slides
I know that it should simply be eased/tapped out but mine is pretty solidly held in place and I don’t want to damage it by banging to force it out.
I have removed the tank itself and taken out the old sender. I can not remove the arm itself from the little hole into which it slides
I know that it should simply be eased/tapped out but mine is pretty solidly held in place and I don’t want to damage it by banging to force it out.
- Tue Jul 02, 2019 6:28 am
- Forum: Daimler SP250/251, 2.5 V8 & V8-250 Saloon Forum
- Topic: Removal of float arm from SP250 petrol tank sender.
- Replies: 10
- Views: 2134
Removal of float arm from SP250 petrol tank sender.
Hi All Can anyone advise how to remove the tubular float arm bar from the housing section of the sender in the petrol tank please? There appears to be several grooves over a half inch length of the tube towards the opposite end to the float and these are very firmly lodged inside the hole of a tiny ...
- Tue Apr 16, 2019 10:43 am
- Forum: Daimler SP250/251, 2.5 V8 & V8-250 Saloon Forum
- Topic: SP250 engine timing
- Replies: 2
- Views: 883
SP250 engine timing
Hi All
Can anyone advise me of what the strobe timing figure should be at 700rpm please?
Can anyone advise me of what the strobe timing figure should be at 700rpm please?
- Wed Apr 10, 2019 8:38 am
- Forum: Daimler SP250/251, 2.5 V8 & V8-250 Saloon Forum
- Topic: 250 v8 rear hub removal (i hope)
- Replies: 47
- Views: 7173
Re: 250 v8 rear hub removal (i hope)
Hi Guitarman
If you live nearby you are welcome to borrow it. I live in South Wales.
If you live nearby you are welcome to borrow it. I live in South Wales.