If you would like to join the DLOC, please visit the Club's website https://www.dloc.org.uk/
Please don't post someone's email address. Some people don't want to risk it being harvested by spambots and GDPR regulations discourage it.
Always look at "ACTIVE TOPICS" which gives all posts in date & time order if you can't find a post or "Your Posts", as topics are sometimes moved.
Reg. nrs. Please add reg. nr. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.

Search found 328 matches

by Marcel Renshaw
Thu Jul 18, 2019 3:21 pm
Forum: Daimler SP250/251, 2.5 V8 & V8-250 Saloon Forum
Topic: V8 Parts Catalogue
Replies: 2
Views: 160

Re: V8 Parts Catalogue

Copies of the manual are available through the DLOC free of charge to members as a PDF.
by Marcel Renshaw
Wed Jul 17, 2019 11:17 pm
Forum: Daimler Forum (not SP250/251, 2.5 V8 or V8-250)
Topic: Consort Front Bumper Brackets
Replies: 4
Views: 167

Re: Consort Front Bumper Brackets

On both my Consort and Empress there weren’t captivated nuts holding the bumper onto the box section. It’s possible to get fingers and spanner’s in to position and tighten the screws.
There were captivated nuts holding the wing supports on.
by Marcel Renshaw
Tue Jul 16, 2019 2:59 pm
Forum: Daimler Forum (not SP250/251, 2.5 V8 or V8-250)
Topic: Rubber bushings.
Replies: 2
Views: 77

Re: Rubber bushings.

They are an exchange part from David Beales. They are moulded in with new pins.
by Marcel Renshaw
Tue Jul 09, 2019 9:29 pm
Forum: Daimler Forum (not SP250/251, 2.5 V8 or V8-250)
Topic: Daimler 15 engine rubbers.
Replies: 4
Views: 173

Re: Daimler 15 engine rubbers.

There are photos of the various rubbers on eBay.
I list as Marcel 10_4 and John Nash as Landcruiser. We both have rubbers available. If you choose to buy from me they would be cheaper direct as I wouldn't have to cover eBay's 10% commission fee.
The pre war Lanchester 10 also uses the same rubbers.
by Marcel Renshaw
Mon Jul 01, 2019 7:47 am
Forum: Cars & Parts Wanted
Topic: where to get exhausts?
Replies: 3
Views: 268

Re: where to get exhausts?

Welcome to the forum. Which Empress do you have? PDGough at Watnall Nottinghamshire have made many Daimler and Lanchester exhausts.. I had one for my DB18 Consort from them. For my DB18 Empress I used stainless exhaust specialists in Huthwaite Nottinghamshire. The stand of work was good on both syst...
by Marcel Renshaw
Sun Jun 30, 2019 5:36 pm
Forum: Daimler Forum (not SP250/251, 2.5 V8 or V8-250)
Topic: Any idea? Sport Head
Replies: 6
Views: 356

Re: Any idea? Sport Head

If you could find an inlet manifold, carbs, rocker cover and oil bath air cleaner. You would get a slight increase in power but probably not significant enough for all of the effort
The only thing I can think of for the threaded hole is to fasten the petrol pipe to the head with a “P” clip.
by Marcel Renshaw
Tue Jun 25, 2019 7:36 am
Forum: Daimler Forum (not SP250/251, 2.5 V8 or V8-250)
Topic: Strange Case of Door Handles
Replies: 4
Views: 225

Re: Strange Case of Door Handles

The door handles on the DB18 saloons / Consorts were also used on some Lagondas they are different to the Conquest range. Good secondhand locking handles are getting hard to find..
by Marcel Renshaw
Mon Jun 17, 2019 7:15 pm
Forum: Lanchester Forum
Topic: Start Motor Lanchester 14
Replies: 1
Views: 100

Re: Start Motor Lanchester 14

You should be able to get a reconditioned one or parts. My preferred company are based in Shirebrook and are Classic and vintage dynamo. They have been very helpful had very knowledgable.
Telephone 01623 747666.
by Marcel Renshaw
Sun Jun 16, 2019 4:15 pm
Forum: Lanchester Forum
Topic: Just bought a Lanchester 14 Leda
Replies: 4
Views: 143

Re: Just bought a Lanchester 14 Leda

Hello and congratulations buy a Lanchester.
Many years ago when the club ventured into spares they had panels supplied by Martin Robey. It might be worth contacting them.
by Marcel Renshaw
Thu Jun 13, 2019 6:13 pm
Forum: Parts for Sale & List of Suppliers
Topic: A challenge....?
Replies: 3
Views: 272

Re: A challenge....?

Much difference in price between that and the early one for sale currently at £10.50