If you would like to join the DLOC, please visit the Club's website https://www.dloc.org.uk/
Please don't post someone's email address. Some people don't want to risk it being harvested by spambots and GDPR regulations discourage it.
Always look at "ACTIVE TOPICS" which gives all posts in date & time order if you can't find a post or "Your Posts", as topics are sometimes moved.
Reg. nrs. Please add reg. nr. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.
FORUM DOWNTIME 22/06/19 , please read this topic: viewtopic.php?f=16&t=4577 There are missing posts. Please post again.

Needles in the haystack

Post Reply
Crossley Stephenson
Posts: 231
Joined: Wed Feb 10, 2016 9:15 pm
Location: Victoria, Australia

Needles in the haystack

Post by Crossley Stephenson » Thu Oct 11, 2018 10:48 am

I'm restoring a DJ254 NDHC......

I need - the chrome nostrils on the bonnet (stop laughing, there may be some out there); the heater control face (maybe shared with other Daimlers) and the really really hard one is some seats - 2 front, one side facing rear (rocking horse....)
IMG_1746.JPG (20.98 KiB) Viewed 553 times
Can you help?


Posts: 112
Joined: Fri Feb 26, 2016 10:31 pm
Location: Bakewell

Re: Needles in the haystack

Post by migray » Thu Oct 11, 2018 7:42 pm


The heater control is the same as the Conquest Century II, though the markings are different. I believe it was also used on some of the other larger mid to late 50s Daimlers. I replaced the one on my DJ254 with one from a Conquest Century and produced a decal to replicate the lettering. The knobs are also specific to the DJ254 I think.

The other items are going to be harder to track down though the grills look possible to make from scratch. I believe I read somewhere that the seat frames are the same as the Conquest range but I couldn't be sure. The backs are tapered on the NDHC and the leather pleating is different in style. Hopefully someone who has been hoarding parts might be able to help.

Best wishes and good luck


Post Reply