Hi
Any source for these at present ?.
Thanks !
Cameron
Forum registration by new users: Guests should use the Register button top right but if you have difficulty Email mail @ chalkevalley.info (delete spaces).
If you would like to join the DLOC, please visit the Club's website https://www.dloc.org.uk/
Please don't post someone's email address. Some people don't want to risk it being harvested by spambots and GDPR regulations discourage it.
Always look at "ACTIVE TOPICS" which gives all posts in date & time order if you can't find a post or "Your Posts", as topics are sometimes moved.
Reg. nrs. Please add reg. nr. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.
If you would like to join the DLOC, please visit the Club's website https://www.dloc.org.uk/
Please don't post someone's email address. Some people don't want to risk it being harvested by spambots and GDPR regulations discourage it.
Always look at "ACTIVE TOPICS" which gives all posts in date & time order if you can't find a post or "Your Posts", as topics are sometimes moved.
Reg. nrs. Please add reg. nr. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.
Tool for removing knurled rocker cover nuts
Re: Tool for removing knurled rocker cover nuts
Hi
I assume for a V8 engine then Russ Carpenter does one
Regards
Colin
I assume for a V8 engine then Russ Carpenter does one
Regards
Colin
- Vortex O'Plinth
- Posts: 851
- Joined: Fri Feb 12, 2016 8:15 pm
- Location: Gloucestershire
Re: Tool for removing knurled rocker cover nuts
The club had a batch made for the SP250 a couple of years ago. The design was less over-engineered than the Russ Carpenter tool - and didn't necessitate removing the plug leads in order to use it. Contact Laurence Jones; his details are in PasSPort or on the SP250 Owners website.
Nick
"Open the pod bay door Hal".
"Open the pod bay door Hal".
Re: Tool for removing knurled rocker cover nuts
Also a C. Demler offering:
Re: Tool for removing knurled rocker cover nuts
Now sorted - Many Thanks for replies.
Cameron
Cameron