Hello,
Can anyone recommend a supplier of a good quality 12 volt ignition coil? I need one that has the screw fitting not the push on HT lead.
Ideally it should be a copy of the original 1930/40 type with the low tension connections having a british (not metric) thread so I can use the original bakerlite thumbnuts.
I bought one a couple of years ago and it got very hot and never really seemed to perform. It's also gone rusty very quickly
It's for my '38 EL24. Any suggestions?
Please visit the Club's website https://www.dloc.org.uk/ to join. Visit https://www.dloc.org.uk/adhoc to DONATE towards the cost of the forum.
Please don't post someone's email address to avoid it being harvested by spambots and it's against GDPR regulations.
Always look at "ACTIVE TOPICS" to see all posts in date & time order as they are sometimes moved; or look at "Your Posts".
Please add Reg. nrs. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.
CHANGED YOUR EMAIL ADDRESS since registering?, click your username and check your address in User Control Panel, Profile, Account Settings.
If you want help to register, use "contact us" at page bottom for help.
Please don't post someone's email address to avoid it being harvested by spambots and it's against GDPR regulations.
Always look at "ACTIVE TOPICS" to see all posts in date & time order as they are sometimes moved; or look at "Your Posts".
Please add Reg. nrs. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.
CHANGED YOUR EMAIL ADDRESS since registering?, click your username and check your address in User Control Panel, Profile, Account Settings.
If you want help to register, use "contact us" at page bottom for help.
Good quality screw cap ignition coil wanted
Good quality screw cap ignition coil wanted
Cheers, Henry Curwen
Registrar for Conquest & Century Saloons (DJ250/1, DJ256/7, DJ260/1)
Conquest (Drop Head) Coupe DJ252
Registrar for Conquest & Century Saloons (DJ250/1, DJ256/7, DJ260/1)
Conquest (Drop Head) Coupe DJ252
- watkindj
- Extremely Wise Man
- Posts: 1156
- Joined: Wed Feb 10, 2016 11:27 am
- Location: Cambridge
- Contact:
Re: Good quality screw cap ignition coil wanted
Darren
South Cambridgeshire
XJ Registrar &
LD10 Registrar
LD10 Website Webmaster Incorporating (Worldwide Lanchester LD10 Register)
http://ld10.awardspace.co.uk
South Cambridgeshire
XJ Registrar &
LD10 Registrar
LD10 Website Webmaster Incorporating (Worldwide Lanchester LD10 Register)
http://ld10.awardspace.co.uk
Re: Good quality screw cap ignition coil wanted
Thanks Darren,
I'll email him, I need some other bits from him as well.
I'll email him, I need some other bits from him as well.
Cheers, Henry Curwen
Registrar for Conquest & Century Saloons (DJ250/1, DJ256/7, DJ260/1)
Conquest (Drop Head) Coupe DJ252
Registrar for Conquest & Century Saloons (DJ250/1, DJ256/7, DJ260/1)
Conquest (Drop Head) Coupe DJ252
- watkindj
- Extremely Wise Man
- Posts: 1156
- Joined: Wed Feb 10, 2016 11:27 am
- Location: Cambridge
- Contact:
Re: Good quality screw cap ignition coil wanted
your welcome
Darren
South Cambridgeshire
XJ Registrar &
LD10 Registrar
LD10 Website Webmaster Incorporating (Worldwide Lanchester LD10 Register)
http://ld10.awardspace.co.uk
South Cambridgeshire
XJ Registrar &
LD10 Registrar
LD10 Website Webmaster Incorporating (Worldwide Lanchester LD10 Register)
http://ld10.awardspace.co.uk
- marchesmark
- Helpful Person
- Posts: 475
- Joined: Tue Feb 09, 2016 8:02 pm
Re: Good quality screw cap ignition coil wanted
You can get them from most of the usual places - Auto Electrical Supplies, Tim Hodgekiss, Green Spark PLug Co etc. Holden have this one:
http://www.holden.co.uk/displayproduct. ... de=030.005
which is expensive, but probably the correct one.
http://www.holden.co.uk/displayproduct. ... de=030.005
which is expensive, but probably the correct one.
Re: Good quality screw cap ignition coil wanted
Thanks Mark,
I did get the last one from Holden, and yes it had all the right fittings.
I do need to check the other components in the ignition circuit to confirm my suspicions.
I did get the last one from Holden, and yes it had all the right fittings.
I do need to check the other components in the ignition circuit to confirm my suspicions.
Cheers, Henry Curwen
Registrar for Conquest & Century Saloons (DJ250/1, DJ256/7, DJ260/1)
Conquest (Drop Head) Coupe DJ252
Registrar for Conquest & Century Saloons (DJ250/1, DJ256/7, DJ260/1)
Conquest (Drop Head) Coupe DJ252