I am looking for SP bonnet / boot fittings after I sent the originals for plating and the firm lost them.
I need a complete bonnet locking mechanism, just the parts that bolt to the bonnet, i.e. the plate, spring and locking rod etc.
I also need the mounting brackets and retaining clips ( I have the rubber bits) for the bonnet and boot lid holding rods. I have the rods but need the hardware to mount them.
Any offers gratefully received, condition is unimportant.
Many thanks.
Please visit the Club's website https://www.dloc.org.uk/ to join. Visit https://www.dloc.org.uk/adhoc to DONATE towards the cost of the forum.
Please don't post someone's email address to avoid it being harvested by spambots and it's against GDPR regulations.
Always look at "ACTIVE TOPICS" to see all posts in date & time order as they are sometimes moved; or look at "Your Posts".
Please add Reg. nrs. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.
CHANGED YOUR EMAIL ADDRESS since registering?, click your username and check your address in User Control Panel, Profile, Account Settings.
If you want help to register, use "contact us" at page bottom for help.
Please don't post someone's email address to avoid it being harvested by spambots and it's against GDPR regulations.
Always look at "ACTIVE TOPICS" to see all posts in date & time order as they are sometimes moved; or look at "Your Posts".
Please add Reg. nrs. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.
CHANGED YOUR EMAIL ADDRESS since registering?, click your username and check your address in User Control Panel, Profile, Account Settings.
If you want help to register, use "contact us" at page bottom for help.
SP 250 Bonnet and Boot Fittings
Re: SP 250 Bonnet and Boot Fittings
Hi Ian, I can help with some of the parts - bonnet spring, pin and thimble; boot and bonnet prop hinges.