Hello
I am looking for a good driver and passenger door glass for my 1949 Briggs bodied LD10 - it is a recent purchase and for some reason both windows are badly cracked.
Please visit the Club's website https://www.dloc.org.uk/ to join. Visit https://www.dloc.org.uk/adhoc to DONATE towards the cost of the forum.
Please don't post someone's email address to avoid it being harvested by spambots and it's against GDPR regulations.
Always look at "ACTIVE TOPICS" to see all posts in date & time order as they are sometimes moved; or look at "Your Posts".
Please add Reg. nrs. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.
CHANGED YOUR EMAIL ADDRESS since registering?, click your username and check your address in User Control Panel, Profile, Account Settings.
If you want help to register, use "contact us" at page bottom for help.
Please don't post someone's email address to avoid it being harvested by spambots and it's against GDPR regulations.
Always look at "ACTIVE TOPICS" to see all posts in date & time order as they are sometimes moved; or look at "Your Posts".
Please add Reg. nrs. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.
CHANGED YOUR EMAIL ADDRESS since registering?, click your username and check your address in User Control Panel, Profile, Account Settings.
If you want help to register, use "contact us" at page bottom for help.
LD10 - Driver & Passenger Window Required
-
- Posts: 6
- Joined: Thu Oct 19, 2017 2:01 pm
- Location: Halifax UK
-
- Wise Man
- Posts: 713
- Joined: Wed Feb 10, 2016 8:23 pm
Re: LD10 - Driver & Passenger Window Required
Richard a hard part to find and it is a common problem will need some on a LD10 I am restoring, think they are 5mm laminated which is hard to find any glass company that stock it.
Have had a look and a company that i have used locally for sealed units shows it can make laminate to other thickness , they have cnc cutting so guess no problem with shape .
The edges are then rounded and polished like they need to be, some people may have used 6mm or tried it as it is the standard stock size but might make the movement of glass hard or damage the winder.
If none are available from used spares we may need to get some made.
Peter
Have had a look and a company that i have used locally for sealed units shows it can make laminate to other thickness , they have cnc cutting so guess no problem with shape .
The edges are then rounded and polished like they need to be, some people may have used 6mm or tried it as it is the standard stock size but might make the movement of glass hard or damage the winder.
If none are available from used spares we may need to get some made.
Peter