Having just completed a 200 mile round trip in my Conquest NDHC this weekend the accelerator pedal broke off from the bottom pivot as I turned into the driveway. The hand throttle allowed me to get into the garage but now I am stuck with a non-functioning car and I am booked to go on a rally in the Cotswolds in just over a week.
It is the pedal that has cracked through in 3 pieces; the pivot bracket, which John Nash sells, is fine. Can anyone help with a replacement please? I'm pretty sure the part is common to all the DJ range.

Thanks

Mike

No luck so far in tracking down a replacement. Derek Sleigh reckons it is a common problem and I will need to get someone to make something to fit. I believe the pedal is common to most 50s Daimlers (and LJ200). I can probably saw the bottom off the pedal and screw a P shaped strap on to go round the pivot pin but it doesn't seem very elegant a solution. Any other ideas?

Mike

https://www.ebay.co.uk/itm/lanchester-L ... SwqDhbH9DX

Think this could be the same can measure my LD10 if it helps.

IF it is alloy which it would seem guess you could have it welded or a new piece welded in and drill a new hole and bush it.

Unfortunately the attachment at the top seems quite different. Thanks for getting back to me though.
Mike

Hi Mike

I have this one that you could purchase from me for a small sum. Please pm me to arrange purchase if you would like it

Cheers

Graham

i have many conquest parts will look and see can you post a picture of your pedal please