Still after a catch to complete my restoration.
It's the base I need.
It's made of mazak and mine has cracked and the secondhand one's I've seen are all pitted.
There were a few new one's cast in brass but it seems they're all gone and Adrian said the
factory that made them will not be doing any more.
I would have thought there would have been a need for them as there are quite a few cars
being restored.
Keith
Please visit the Club's website https://www.dloc.org.uk/ to join. Visit https://www.dloc.org.uk/adhoc to DONATE towards the cost of the forum.
Please don't post someone's email address to avoid it being harvested by spambots and it's against GDPR regulations.
Always look at "ACTIVE TOPICS" to see all posts in date & time order as they are sometimes moved; or look at "Your Posts".
Please add Reg. nrs. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.
CHANGED YOUR EMAIL ADDRESS since registering?, click your username and check your address in User Control Panel, Profile, Account Settings.
If you want help to register, use "contact us" at page bottom for help.
Please don't post someone's email address to avoid it being harvested by spambots and it's against GDPR regulations.
Always look at "ACTIVE TOPICS" to see all posts in date & time order as they are sometimes moved; or look at "Your Posts".
Please add Reg. nrs. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.
CHANGED YOUR EMAIL ADDRESS since registering?, click your username and check your address in User Control Panel, Profile, Account Settings.
If you want help to register, use "contact us" at page bottom for help.
LD10 Bonnet Catch
-
- Posts: 72
- Joined: Fri Feb 19, 2016 2:23 am
- Location: Melbourne Australia
Re: LD10 Bonnet Catch
Hi, I have a friend and also a Lanchester & BSA owner, who just happens to own a Foundry.
If it were possible to obtain the Casting Moulds for these items, it may be possible to have another batch produced .
Chees Al
If it were possible to obtain the Casting Moulds for these items, it may be possible to have another batch produced .
Chees Al
-
- Posts: 72
- Joined: Fri Feb 19, 2016 2:23 am
- Location: Melbourne Australia
Re: LD10 Bonnet Catch
Thanks Al.
Perhaps someone in the UK can help out.
Keith
Perhaps someone in the UK can help out.
Keith