If you would like to join the DLOC, please visit the Club's website https://www.dloc.org.uk/
Please don't post someone's email address. Some people don't want to risk it being harvested by spambots and GDPR regulations discourage it.
Always look at "ACTIVE TOPICS" which gives all posts in date & time order if you can't find a post or "Your Posts", as topics are sometimes moved.
Reg. nrs. Please add reg. nr. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.
FORUM DOWNTIME 22/06/19 , please read this topic: viewtopic.php?f=16&t=4577 There are missing posts. Please post again.

DB18 door-window seal

Post Reply
yapyap
Posts: 3
Joined: Mon Nov 12, 2018 8:58 pm
Location: Liskeard, Cornwall, UK

DB18 door-window seal

Post by yapyap » Mon Nov 12, 2018 9:08 pm

Gradually restoring 1949 DB18 saloon but facing silly problem. All 4 doors are missing the seal which goes on the outside of the windows. It looks like it was nailed to the frame but not a scrap remains! So can anyone help with what the profile should look like, or preferably point me at a likely supplier?
Cheers.

classiclife
Posts: 294
Joined: Wed Sep 05, 2018 9:55 am
Location: Ridgewood - East Sussex
Contact:

Re: DB18 door-window seal

Post by classiclife » Thu Nov 15, 2018 2:02 pm

Hello,

Could be worth contacting Phoenix Trim in Cullompton Devon and speaking with Kaye who is very helpful.

Kaye will send out trim samples once you know or have been informed what profile you need.

To assist, I have attached their online pdf catalogue which is comprehensive; hopefully it may help.

Good luck.

Regards.

Richard.

https://phoenixtrim.co.uk/main-catalogue-3-w.asp
1968 Daimler V8-250 Saloon
DLOC East Sussex Area Representative.

Southern Classics Society Events Co-ordinator.
www.southernclassics.org.uk

Marcel Renshaw
Posts: 322
Joined: Fri Feb 12, 2016 8:44 pm
Location: Derbyshire

Re: DB18 door-window seal

Post by Marcel Renshaw » Fri Nov 16, 2018 10:21 am

Try David Beales. He has had a number of rubber mouldings remanufactured especially for the DB18.

yapyap
Posts: 3
Joined: Mon Nov 12, 2018 8:58 pm
Location: Liskeard, Cornwall, UK

Re: DB18 door-window seal

Post by yapyap » Thu Dec 06, 2018 7:41 pm

Thanks to classiclife and marcel very much for your replies. I will try them and report back.

yapyap
Posts: 3
Joined: Mon Nov 12, 2018 8:58 pm
Location: Liskeard, Cornwall, UK

Re: DB18 door-window seal

Post by yapyap » Wed Dec 19, 2018 5:27 pm

I have been put in touch with a fellow owner and will be examining his beautiful DB18 in the new year. Then armed with the Phoenix’s catalogue - which looks exceedingly useful by the way - I am hopeful at finding a match. Again, I’ll report back with results. Meanwhile thanks to all involved.

Post Reply