Please don't post someone's email address or, if you must, put spaces around the @ or change @ to (at). Some people don't want to risk it being harvested by spambots.
If you can't find a post, click "Active topics" or "Your posts", as topics are sometimes moved; it's probably quicker than using the Search button.
Reg. nrs. Please add reg. nr. when posting a photo or anything about a car as this will help searches. Don't add punctuation after nr. as this negates search.

Temp Gauge Repair

Post Reply
JT7196
Posts: 852
Joined: Sat Feb 13, 2016 7:22 am

Temp Gauge Repair

Post by JT7196 » Thu Dec 06, 2018 11:43 pm

Hi Chaps, as many of you will know by now, I have given up trying to get my Temp Gauge repaired with Speedograph, (Failed twice ) and Speedycables apparently do not give a very good service according to some or the “ Feedback” I have seen.
I have tried to contact Adrian Sidwell about Three times now, and still not getting a reply, so is there anybody out the who can get my Temp Gauge working ?or at least recommend a competent repairer please?
In desperation, I have ordered a modern electric one, which comes supplied with a Bracket, I can then secure it on the underside of the Dashboard.
Your thoughts,would be much appreciated😀😀

Cheers Al 😀😀

classiclife
Posts: 99
Joined: Wed Sep 05, 2018 9:55 am
Location: Ridgewood - East Sussex
Contact:

Re: Temp Gauge Repair

Post by classiclife » Fri Dec 07, 2018 8:06 am

Hello Al,

Not certain if you have a capillary temperature gauge, which may scupper this suggestion, but JDO Instruments might be able to assist.

It is owned / run by John Ostick and have attached a link to provide contact if you so wish.

He MAY be able to do an electronic conversion whilst keeping the integrity of the instrument - I just do not know.

He can be a bit blunt, but is harmless !!

Certainly worth a call - his details are on the contact page.

Regards.

Richard.

http://www.jdo1.co.uk/other_services.html

ranald
Posts: 237
Joined: Sat Feb 13, 2016 8:21 am
Location: North Wales

Re: Temp Gauge Repair

Post by ranald » Fri Dec 07, 2018 8:39 am

it’s a few years ago now but i used JDO to recondition my Jaeger chronometric speedometer. i was pleased with the service provided. i’ve also had experience of Speedycables and was very disappointed. Again, it was a few years ago and may have improved since. All the best, Ranald

John Hitchins
Site Admin
Posts: 189
Joined: Mon Feb 08, 2016 10:52 am
Location: Wellington Somerset

Re: Temp Gauge Repair

Post by John Hitchins » Fri Dec 07, 2018 9:29 pm

Al, did you try the boil test to see if any movement at all?

JT7196
Posts: 852
Joined: Sat Feb 13, 2016 7:22 am

Re: Temp Gauge Repair

Post by JT7196 » Sat Dec 08, 2018 9:51 am

Hi John, yes I did, and it did not move off the stop!
I did actually reply to you last week, it obviously got lost in the Either.
In answer to you Ranald, no its the Capillary type Temperature Gauge, still awaiting a reply from Adrian !!!! :( :( :( :(


Cheers Al :D :D

weddingcartim
Posts: 63
Joined: Mon Feb 15, 2016 7:38 pm

Re: Temp Gauge Repair

Post by weddingcartim » Sun Dec 09, 2018 4:28 pm

hi al i used steve hunt in hall green birmingham he has done 3 for me no probs at all i can you post a picture as i have 1 or 2 i can take a loog what i have

JT7196
Posts: 852
Joined: Sat Feb 13, 2016 7:22 am

Re: Temp Gauge Repair

Post by JT7196 » Sun Dec 09, 2018 6:20 pm

Hi Tim, could you send me Steve Hunts contact details please?

Alan.wheatley63@gmail.com

Best wishes ,and many thanks A’l 😀😀

Post Reply