Hi Chaps, as many of you will know by now, I have given up trying to get my Temp Gauge repaired with Speedograph, (Failed twice ) and Speedycables apparently do not give a very good service according to some or the โ Feedbackโ I have seen.
I have tried to contact Adrian Sidwell about Three times now, and still not getting a reply, so is there anybody out the who can get my Temp Gauge working ?or at least recommend a competent repairer please?
In desperation, I have ordered a modern electric one, which comes supplied with a Bracket, I can then secure it on the underside of the Dashboard.
Your thoughts,would be much appreciated
Cheers Al
Please visit the Club's website https://www.dloc.org.uk/ to join. Visit https://www.dloc.org.uk/adhoc to DONATE towards the cost of the forum.
Please don't post someone's email address to avoid it being harvested by spambots and it's against GDPR regulations.
Always look at "ACTIVE TOPICS" to see all posts in date & time order as they are sometimes moved; or look at "Your Posts".
Please add Reg. nrs. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.
CHANGED YOUR EMAIL ADDRESS since registering?, click your username and check your address in User Control Panel, Profile, Account Settings.
If you want help to register, use "contact us" at page bottom for help.
Please don't post someone's email address to avoid it being harvested by spambots and it's against GDPR regulations.
Always look at "ACTIVE TOPICS" to see all posts in date & time order as they are sometimes moved; or look at "Your Posts".
Please add Reg. nrs. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.
CHANGED YOUR EMAIL ADDRESS since registering?, click your username and check your address in User Control Panel, Profile, Account Settings.
If you want help to register, use "contact us" at page bottom for help.
Temp Gauge Repair
-
- Classic Wise Man
- Posts: 1607
- Joined: Wed Sep 05, 2018 9:55 am
- Location: Ridgewood - East Sussex
- Contact:
Re: Temp Gauge Repair
Hello Al,
Not certain if you have a capillary temperature gauge, which may scupper this suggestion, but JDO Instruments might be able to assist.
It is owned / run by John Ostick and have attached a link to provide contact if you so wish.
He MAY be able to do an electronic conversion whilst keeping the integrity of the instrument - I just do not know.
He can be a bit blunt, but is harmless !!
Certainly worth a call - his details are on the contact page.
Regards.
Richard.
http://www.jdo1.co.uk/other_services.html
Not certain if you have a capillary temperature gauge, which may scupper this suggestion, but JDO Instruments might be able to assist.
It is owned / run by John Ostick and have attached a link to provide contact if you so wish.
He MAY be able to do an electronic conversion whilst keeping the integrity of the instrument - I just do not know.
He can be a bit blunt, but is harmless !!
Certainly worth a call - his details are on the contact page.
Regards.
Richard.
http://www.jdo1.co.uk/other_services.html
1968 Daimler V8-250 Saloon
DLOC East Sussex Branch Secretary
DLOC 2.5L V8 & V8-250 Registrar - https://www.dloc.org.uk/v8-250
DLOC 2024 International Rally - https://www.dloc.org.uk/rally-2024
DLOC East Sussex Branch Secretary
DLOC 2.5L V8 & V8-250 Registrar - https://www.dloc.org.uk/v8-250
DLOC 2024 International Rally - https://www.dloc.org.uk/rally-2024
Re: Temp Gauge Repair
itโs a few years ago now but i used JDO to recondition my Jaeger chronometric speedometer. i was pleased with the service provided. iโve also had experience of Speedycables and was very disappointed. Again, it was a few years ago and may have improved since. All the best, Ranald
-
- Site Admin
- Posts: 244
- Joined: Mon Feb 08, 2016 10:52 am
- Location: Wellington Somerset
Re: Temp Gauge Repair
Al, did you try the boil test to see if any movement at all?
Re: Temp Gauge Repair
Hi John, yes I did, and it did not move off the stop!
I did actually reply to you last week, it obviously got lost in the Either.
In answer to you Ranald, no its the Capillary type Temperature Gauge, still awaiting a reply from Adrian !!!!
Cheers Al
I did actually reply to you last week, it obviously got lost in the Either.
In answer to you Ranald, no its the Capillary type Temperature Gauge, still awaiting a reply from Adrian !!!!
Cheers Al
-
- Posts: 67
- Joined: Mon Feb 15, 2016 7:38 pm
Re: Temp Gauge Repair
hi al i used steve hunt in hall green birmingham he has done 3 for me no probs at all i can you post a picture as i have 1 or 2 i can take a loog what i have
Re: Temp Gauge Repair
Hi Tim, could you send me Steve Hunts contact details please?
Alan.wheatley63@gmail.com
Best wishes ,and many thanks Aโl
Alan.wheatley63@gmail.com
Best wishes ,and many thanks Aโl
-
- Posts: 67
- Joined: Mon Feb 15, 2016 7:38 pm
Re: Temp Gauge Repair
will look it up for you
Re: Temp Gauge Repair
Hi Tim, Temparature Gauge now with Adrian Sidwell, hopefully it should be returned to me before I embark on my proposed holiday in Perth WA , sometime towards the end of January .
Cheers Al
Cheers Al
Last edited by JT7196 on Sat Jan 12, 2019 11:47 pm, edited 1 time in total.
-
- Posts: 67
- Joined: Mon Feb 15, 2016 7:38 pm
Re: Temp Gauge Repair
for future ref steve@stevehunt.demon.co.uk or 01217770071