Page 2 of 2
Re: lanchester parts and information needed
Posted: Mon Jan 28, 2019 7:21 pm
by alan la10
JT7196 wrote: ↑Mon Jan 28, 2019 3:41 pm
Hi try Cox & Turner Engineeing located at Tintinhull Somerset
Tel 01935 826816
I live about a mile away , but st this time I. am currently in Perth SW Australia
Best wishes. Al
thanks for info
Re: lanchester parts and information needed
Posted: Mon Jan 28, 2019 7:35 pm
by classiclife
Excellent engineering / machining business; real old school with deep seated knowledge.
Lovely village with a great pub !!
Regards.
Richard.
Re: lanchester parts and information needed
Posted: Tue Jan 29, 2019 3:00 am
by bop
Hi Alan,
I have some experience with Daimler 15 valves. This came about when I had the head rebuilt. Not all Daimler 15 valves are the same as shown below
The inlet valves on mine were Transco 487 and the exhaust valves had the number 98684 etched on them.
Remember different valves have different collets!
Bob
Re: lanchester parts and information needed
Posted: Tue Jan 29, 2019 10:44 pm
by Simon Hyslop
I'm pleased you got the last that Thorntons had. As long as I have the 10, I've told Thorntons I'll have at least 4 and possibly 8 which is the best commitment I can make. If I had got the ones you've got now they would only have gone on the shelf for possible future use so it was better you got them.