Hi Chaps, still trying to locate a Fuel Tank Sender Unit for my Lanchester 11, if anybody can help please do get in touch
07713-673230
01935-420168
Cheers Al
Please visit the Club's website https://www.dloc.org.uk/ to join. Visit https://www.dloc.org.uk/adhoc to DONATE towards the cost of the forum.
Please don't post someone's email address to avoid it being harvested by spambots and it's against GDPR regulations.
Always look at "ACTIVE TOPICS" to see all posts in date & time order as they are sometimes moved; or look at "Your Posts".
Please add Reg. nrs. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.
CHANGED YOUR EMAIL ADDRESS since registering?, click your username and check your address in User Control Panel, Profile, Account Settings.
If you want help to register, use "contact us" at page bottom for help.
Please don't post someone's email address to avoid it being harvested by spambots and it's against GDPR regulations.
Always look at "ACTIVE TOPICS" to see all posts in date & time order as they are sometimes moved; or look at "Your Posts".
Please add Reg. nrs. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.
CHANGED YOUR EMAIL ADDRESS since registering?, click your username and check your address in User Control Panel, Profile, Account Settings.
If you want help to register, use "contact us" at page bottom for help.
Lanchester 11 Petrol Tank Sender
Re: Lanchester 11 Petrol Tank Sender
Hi, surely somebody out there must have a Sender unit from an LA 11 kicking around somewhere ??
Cheers Al
Cheers Al
Re: Lanchester 11 Petrol Tank Sender
Dear Al,
Is it an AC or Smiths unit ? If the former, they are a bit thin on the ground (you know that already though!) but I suppose there are two options. Would something like this :
https://www.ebay.co.uk/itm/GM-AC-DELCO- ... SwB09YCq8K
be of use ? Failing that, it might be possible to find a Smiths type unit that would do the same job.
Again, if it's an AC unit, the mechanical parts of it, apart from casing damage, should be fixable so I'm assuming it's an electrical fault. I wonder if it would be possible to have the resistance rewound if you want to maintain originality. Not maybe the best of answers but in the absence of others, at leaast maybe a start.
Should it be a Smiths one, I have some suggestions on alternative units but it runs in my head your car has AC components, maybe wrongly remembered by me.
Is it an AC or Smiths unit ? If the former, they are a bit thin on the ground (you know that already though!) but I suppose there are two options. Would something like this :
https://www.ebay.co.uk/itm/GM-AC-DELCO- ... SwB09YCq8K
be of use ? Failing that, it might be possible to find a Smiths type unit that would do the same job.
Again, if it's an AC unit, the mechanical parts of it, apart from casing damage, should be fixable so I'm assuming it's an electrical fault. I wonder if it would be possible to have the resistance rewound if you want to maintain originality. Not maybe the best of answers but in the absence of others, at leaast maybe a start.
Should it be a Smiths one, I have some suggestions on alternative units but it runs in my head your car has AC components, maybe wrongly remembered by me.
Re: Lanchester 11 Petrol Tank Sender
Hi Simon, thanks for that link, I did send off for one but unfortunately it was no good so had to return it.
My Sender is actually currently ( Has been for about a month now)at a company named Carwood, who specialise in Rewindโs etc.
One of the older employees is / was hoping to repair it for me, trouble is, that he is semi retired, so only goes in a couple of days a week .
Yes the Gauges are all AC , but not sure about the Sender, although it probably is, but as said , I donโt have to hand at the moment, not sure if a Smiths Petrol Gauge would fit into my existing Gauge binnacle.
Just have wait and see what turns up
Cheers Al
My Sender is actually currently ( Has been for about a month now)at a company named Carwood, who specialise in Rewindโs etc.
One of the older employees is / was hoping to repair it for me, trouble is, that he is semi retired, so only goes in a couple of days a week .
Yes the Gauges are all AC , but not sure about the Sender, although it probably is, but as said , I donโt have to hand at the moment, not sure if a Smiths Petrol Gauge would fit into my existing Gauge binnacle.
Just have wait and see what turns up
Cheers Al
-
- Man of Many Parts
- Posts: 673
- Joined: Fri Feb 12, 2016 8:44 pm
- Location: Derbyshire
Re: Lanchester 11 Petrol Tank Sender
Have you tried David Beales he has reconditioned sender units in the past and has now ventured into a new units.
Re: Lanchester 11 Petrol Tank Sender
Thank's Marcel, at the moment my sender Unit is with a local company named Carwood who carry out all types of Armature winding , there is an older employee who is taking a look at it, if he is unable to rectify it ,then I will certainly contact David Beals.
Best wishes, and many thanks Al
Best wishes, and many thanks Al
Re: Lanchester 11 Petrol Tank Sender
Hi Chaps, received a call from Carwood telling me that they have managed to sort out my Petrol level Sender, just need to go pick it up tomorrow and fit it, hopefully, I will actually have a Fuel Gauge that works properly for the first time in 30 + years .
Cheers al
Cheers al
Re: Lanchester 11 Petrol Tank Sender
Hi Chaps, good news, Gauge now working
Cheers Al
Cheers Al