If you would like to join the DLOC, please visit the Club's website https://www.dloc.org.uk/
Please don't post someone's email address. Some people don't want to risk it being harvested by spambots and GDPR regulations discourage it.
Always look at "ACTIVE TOPICS" which gives all posts in date & time order if you can't find a post as topics are sometimes moved; or look at "Your Posts".
Reg. nrs. Please add reg. nr. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.

Tool for removing knurled rocker cover nuts

Post Reply
csm1406
Posts: 54
Joined: Sat Feb 13, 2016 6:06 pm
Location: west sussex

Tool for removing knurled rocker cover nuts

Post by csm1406 »

Hi
Any source for these at present ?.

Thanks !
Cameron

Warsash 2
Posts: 313
Joined: Sun Feb 28, 2016 1:53 pm

Re: Tool for removing knurled rocker cover nuts

Post by Warsash 2 »

Hi
I assume for a V8 engine then Russ Carpenter does one
Regards

Colin

User avatar
Vortex O'Plinth
Posts: 927
Joined: Fri Feb 12, 2016 8:15 pm
Location: Gloucestershire

Re: Tool for removing knurled rocker cover nuts

Post by Vortex O'Plinth »

The club had a batch made for the SP250 a couple of years ago. The design was less over-engineered than the Russ Carpenter tool - and didn't necessitate removing the plug leads in order to use it. Contact Laurence Jones; his details are in PasSPort or on the SP250 Owners website.
Nick

"Don't bother with the Air & Space Museum - there's nothing to see.......".

User avatar
#100910
Posts: 52
Joined: Sat Feb 13, 2016 2:32 pm
Location: Austin, Texas

Re: Tool for removing knurled rocker cover nuts

Post by #100910 »

Also a C. Demler offering:
RC Spanner.PNG

csm1406
Posts: 54
Joined: Sat Feb 13, 2016 6:06 pm
Location: west sussex

Re: Tool for removing knurled rocker cover nuts

Post by csm1406 »

Now sorted - Many Thanks for replies.

Cameron

Post Reply