Please visit the Club's website https://www.dloc.org.uk/ to join. Visit https://www.dloc.org.uk/adhoc to DONATE towards the cost of the forum.
Please don't post someone's email address to avoid it being harvested by spambots and it's against GDPR regulations.
Always look at "ACTIVE TOPICS" to see all posts in date & time order as they are sometimes moved; or look at "Your Posts".
Please add Reg. nrs. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.
CHANGED YOUR EMAIL ADDRESS since registering?, click your username and check your address in User Control Panel, Profile, Account Settings.
If you want help to register, use "contact us" at page bottom for help.

SP250 distributor washer wanted

Post Reply
User avatar
John-B
Site Admin
Posts: 1755
Joined: Tue Feb 09, 2016 9:10 pm
Location: Salisbury, UK
Contact:

SP250 distributor washer wanted

Post by John-B »

Hello Administrator,

The following is an e-mail sent to you through the administration contact page on "".

The message was sent from a guest who specified the following contact
information:
Name: Malcolm early

Message sent to you follows
~~~~~~~~~~~~~~~~~~~~~~~~~~~

I'm looking to get advice on sourcing celeron distributor washer that goes between distributor collar and engine block. On a Daimler sp250 ‘63. Otherwise dimensions ... I am in Canada

classiclife
Classic Wise Man
Classic Wise Man
Posts: 1601
Joined: Wed Sep 05, 2018 9:55 am
Location: Ridgewood - East Sussex
Contact:

Re: SP250 distributor washer wanted

Post by classiclife »

John,

It may be worth Malcolm contacting the Distributor Doctor, I am sure he will be able to assist.

http://www.distributordoctor.com/

Regards.

Richard.
1968 Daimler V8-250 Saloon
DLOC East Sussex Branch Secretary
DLOC 2.5L V8 & V8-250 Registrar - https://www.dloc.org.uk/v8-250
DLOC 2024 International Rally - https://www.dloc.org.uk/rally-2024

#100910
Posts: 92
Joined: Sat Feb 13, 2016 2:32 pm
Location: Austin, Texas

Re: SP250 distributor washer wanted

Post by #100910 »

Dist-Celeron_Wshr.PNG
Dist-Celeron_Wshr.PNG (10.42 KiB) Viewed 577 times
Dist-Celeron_Wshr_2.PNG

Marcel Renshaw
Man of Many Parts
Man of Many Parts
Posts: 673
Joined: Fri Feb 12, 2016 8:44 pm
Location: Derbyshire

Re: SP250 distributor washer wanted

Post by Marcel Renshaw »

Just going through a box of parts just arrived from Australia.
It isn’t one of these by any chance?
Attachments
image.jpg

Post Reply