Hi Chaps, does anybody know where one can purchase the “ Clip-on” Connectors used on the Linkages, such as Gear sector Rod, Throttle operating Rods etc ?
Cheers Al.
Ps , sometime referred to as “ Divers Helmets”
Please visit the Club's website https://www.dloc.org.uk/ to join. Visit https://www.dloc.org.uk/adhoc to DONATE towards the cost of the forum.
Please don't post someone's email address to avoid it being harvested by spambots and it's against GDPR regulations.
Always look at "ACTIVE TOPICS" to see all posts in date & time order as they are sometimes moved; or look at "Your Posts".
Please add Reg. nrs. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.
CHANGED YOUR EMAIL ADDRESS since registering?, click your username and check your address in User Control Panel, Profile, Account Settings.
If you want help to register, use "contact us" at page bottom for help.
Please don't post someone's email address to avoid it being harvested by spambots and it's against GDPR regulations.
Always look at "ACTIVE TOPICS" to see all posts in date & time order as they are sometimes moved; or look at "Your Posts".
Please add Reg. nrs. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.
CHANGED YOUR EMAIL ADDRESS since registering?, click your username and check your address in User Control Panel, Profile, Account Settings.
If you want help to register, use "contact us" at page bottom for help.
Gear Linkage “Clip-On” Connectors
Re: Gear Linkage “Clip-On” Connectors
Any bearing supplier. Or if you want to pay through the nose look on RS components web site they have branches all over.
Colin,
I may be slow but I’m rough as well !
I may be slow but I’m rough as well !
Re: Gear Linkage “Clip-On” Connectors
Thnx Colin, I’ll take a L@@k
-
- Man of Many Parts
- Posts: 673
- Joined: Fri Feb 12, 2016 8:44 pm
- Location: Derbyshire
Re: Gear Linkage “Clip-On” Connectors
David Beales also sells them.
Re: Gear Linkage “Clip-On” Connectors
Moss Motors has them. For a few of my links the threaded hole was one size too small so I drilled and tapped them. Outside dimensions are the same. Left connector in image is the Moss Motors one.
Last edited by DR450USA on Mon Oct 12, 2020 9:30 pm, edited 1 time in total.
Re: Gear Linkage “Clip-On” Connectors
Thanks Douglas, that’s brilliant news , I’ll pass on this information .
Best wishes, Al
Best wishes, Al
Re: Gear Linkage “Clip-On” Connectors
Hi chaps, well Ive looked and looked, and am darned I’ve I can find any reference to this elusive “Clip on” connectors, perhaps
one of you could point me in the right direction with a reference No please ?.
Cheers Al,
one of you could point me in the right direction with a reference No please ?.
Cheers Al,
Re: Gear Linkage “Clip-On” Connectors
https://www.moss-europe.co.uk/ball-join ... b5311.html
Moss Motors in the USA have the same thing for cheaper!
or ebay https://www.ebay.co.uk/itm/10-32-THREAD ... 2630429125
Moss Motors in the USA have the same thing for cheaper!
or ebay https://www.ebay.co.uk/itm/10-32-THREAD ... 2630429125
Re: Gear Linkage “Clip-On” Connectors
Thanks Mike, just found them on the EBay link, but as Douglas stated, the internal Thread May need to be re-tapped to suit .
Cheers Al
Cheers Al
Re: Gear Linkage “Clip-On” Connectors
Sorry Al, I think I sold you a bum steer. I had in mind the ones with the screw in the end and a split pin.
Colin,
I may be slow but I’m rough as well !
I may be slow but I’m rough as well !