I have a Daimler Roadster 1954 which I have had the cylinder head refurbished. I am now reassembling the engine. Can anyone advise me as to what torque the rocker assembly bolts should be tightened to?
With thanks, Ivar H
Please visit the Club's website https://www.dloc.org.uk/ to join. Visit https://www.dloc.org.uk/adhoc to DONATE towards the cost of the forum.
Please don't post someone's email address to avoid it being harvested by spambots and it's against GDPR regulations.
Always look at "ACTIVE TOPICS" to see all posts in date & time order as they are sometimes moved; or look at "Your Posts".
Please add Reg. nrs. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.
CHANGED YOUR EMAIL ADDRESS since registering?, click your username and check your address in User Control Panel, Profile, Account Settings.
If you want help to register, use "contact us" at page bottom for help.
Please don't post someone's email address to avoid it being harvested by spambots and it's against GDPR regulations.
Always look at "ACTIVE TOPICS" to see all posts in date & time order as they are sometimes moved; or look at "Your Posts".
Please add Reg. nrs. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.
CHANGED YOUR EMAIL ADDRESS since registering?, click your username and check your address in User Control Panel, Profile, Account Settings.
If you want help to register, use "contact us" at page bottom for help.
bolt torque rocker assembly
-
- Posts: 4
- Joined: Thu Dec 29, 2016 2:10 pm
- Location: Plymouth
Re: bolt torque rocker assembly
Hello Ivar and a Happy New Year to you,
Have looked through everything I have and the only reference to Torques is in the Workshop Manual p.9 which gives Cylinder Head Nut-tightening torques as 30/35lb.ft.
Does this help?
Dennis
Have looked through everything I have and the only reference to Torques is in the Workshop Manual p.9 which gives Cylinder Head Nut-tightening torques as 30/35lb.ft.
Does this help?
Dennis