If you would like to join the DLOC, please visit the Club's website https://www.dloc.org.uk/
Please don't post someone's email address. Some people don't want to risk it being harvested by spambots and GDPR regulations discourage it.
Always look at "ACTIVE TOPICS" which gives all posts in date & time order if you can't find a post or "Your Posts", as topics are sometimes moved.
Reg. nrs. Please add reg. nr. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.

Weber carburettor YouTube video

Technical issues not related to a DLOC car marque, eg tyres, ethanol, other car makes, etc. and legal, political and insurance
Post Reply
User avatar
John-B
Site Admin
Posts: 1140
Joined: Tue Feb 09, 2016 9:10 pm
Location: Salisbury, UK
Contact:

Weber carburettor YouTube video

Post by John-B » Thu Sep 27, 2018 4:13 pm

This video shows the assembly of a Weber carburettor (Italian). It's an extremely well-produced video but I'm not sure if it would suit any of our cars but possibly an SP250. Skip the ad at the beginning.

The engine sound at the end sounds like a Ferrari.

How long would it take you guys to take it apart, clean it and reassemble it? The carburettor construction is extremely complicated. It's a lot more complicated than an SU.
Hello Administrator,

The following is an e-mail sent to you through the administration contact page on "".

The message was sent from a guest who specified the following contact
information:
Name: Juan Seren

Message sent to you follows
~~~~~~~~~~~~~~~~~~~~~~~~~~~

Hi, my name is Juan. I´m from Buenos Aires, Argentina. I done a Weber DCD carburetor video and I want share it with you. Please, I look forward to read your comments.

https://www.youtube.com/watch?v=EiN07UE4ZNc

http://jas-3d.blogspot.com/

Best regards, Juan Seren

Christopher Storey
Posts: 251
Joined: Wed Mar 16, 2016 6:40 pm
Location: Cheshire

Re: Weber carburettor YouTube video

Post by Christopher Storey » Fri Sep 28, 2018 5:36 pm

The 28/36 is ( putting it rather cruelly) the cheapest and nastiest of the Weber range, and whilst it might be alright for a Cortina GT or similar, I cannot conceive of its being suitable on a Daimler. You would need at least 2, and more probably 4, and the manifolding would be horrific. There are Webers such as the IDA ( which is a downdraught DCO in essence ) which would just about work on the Daimler, but the real snag with those is that they are essentially full throttle carburetters, and getting chokes and the emulsion tubes right so as to provide proper tractability on a road car would be a nightmare

Post Reply