Please visit the Club's website https://www.dloc.org.uk/ to join. Visit https://www.dloc.org.uk/adhoc to DONATE towards the cost of the forum.
Please don't post someone's email address to avoid it being harvested by spambots and it's against GDPR regulations.
Always look at "ACTIVE TOPICS" to see all posts in date & time order as they are sometimes moved; or look at "Your Posts".
Please add Reg. nrs. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.
CHANGED YOUR EMAIL ADDRESS since registering?, click your username and check your address in User Control Panel, Profile, Account Settings.
If you want help to register, use "contact us" at page bottom for help.
Please don't post someone's email address to avoid it being harvested by spambots and it's against GDPR regulations.
Always look at "ACTIVE TOPICS" to see all posts in date & time order as they are sometimes moved; or look at "Your Posts".
Please add Reg. nrs. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.
CHANGED YOUR EMAIL ADDRESS since registering?, click your username and check your address in User Control Panel, Profile, Account Settings.
If you want help to register, use "contact us" at page bottom for help.
Help from plastics experts please.
-
Route 66drivers.com
- Posts: 22
- Joined: Wed Mar 02, 2016 10:42 pm
Help from plastics experts please.
Help, industrial chemists and plastics experts please. Cracking problems. On my first trial of making my own lights, I used roof resin and made it hot cos I was impatient to see how it would turn out. Well, the plastic cracked in lots of places. So, for the second trial, I used water clear resin, and a very cool mix, taking about a day to harden up. Now, I have no cracks at all where I bent the tube and the resin is, but cracks where there was no heat from bending and no contact with the resin either. Whats happening ??
- Attachments
-
-
-