Page 1 of 1

Daimler E20 reconditioned water pump.

Posted: Fri Jul 13, 2018 1:24 pm
by Marcel Renshaw
Reconditioned pump, new shaft, carbon bush and drain tap.
Please contact me for more details.

Re: Daimler E20 reconditioned water pump.

Posted: Tue Sep 04, 2018 5:27 pm
by PhilB
Hi Marcel,
I have an e20 water pump that is in good condition except for the inlet connection to the rubber hose which has completely corroded away.
What are my options?
many thanks Phil

Re: Daimler E20 reconditioned water pump.

Posted: Tue Sep 04, 2018 9:55 pm
by Marcel Renshaw
The options on this type of pump where the corrosion has destroyed the casting vary.
The end cover can be replaced or it may be possible to cut back the aluminium and then weld on a new section.
In the case of the body for the E20 cutting back the casting and welding in a new section is possible but more tricky as the temperature to weld the aluminium can cause the white metal bush to melt. The body casting can be replaced by modifying a casting from a Daimler 15.
I hope this helps. if you could add some pictures it might be possible to advise further.

Re: Daimler E20 reconditioned water pump.

Posted: Wed Sep 05, 2018 10:53 am
by PhilB
Thanks for replying. I think you have answered all my questions. I have taken photos of the end cover and inlet, the main body of the pump is good. I have found a local company who repair cast aluminum inlet manifolds etc.
Phil
Water pump 2.jpg
The attachment Water pump 2.jpg is no longer available