Please don't post someone's email address or, if you must, put spaces around the @ or change @ to (at). Some people don't want to risk it being harvested by spambots.
If you can't find a post, click "Active topics" or "Your posts", as topics are sometimes moved; it's probably quicker than using the Search button.
Reg. nrs. Please add reg. nr. when posting a photo or anything about a car as this will help searches. Don't add punctuation after nr. as this negates search.

Lanchester piston set available

Post Reply
grahamemmett
Posts: 412
Joined: Mon Feb 08, 2016 8:12 pm
Location: Northwich, Cheshire

Lanchester piston set available

Post by grahamemmett » Mon Aug 20, 2018 2:58 pm

A Facebook message:
"Hi, I have found a set of pistons in my grandfathers garage.
Could someone let me know what model they belong too and if anyone would be interested in them? "

Any interest please PM me.
Hepolite.jpg
Graham Emmett
Northwich, Cheshire
DB18 1949 LCV522 (Yes that one with the P100s)

Stan Thomas
Posts: 446
Joined: Sat Feb 13, 2016 2:14 pm
Location: Penkridge. Staffs.

Re: Lanchester piston set available

Post by Stan Thomas » Tue Aug 21, 2018 5:52 pm

According to the info I have, and based upon the box saying "2-1/2 inches bore" they are listed for a 1934/35 1203cc engine and/or an LD10 1287cc engine.

Hope this helps, but check further!!

grahamemmett
Posts: 412
Joined: Mon Feb 08, 2016 8:12 pm
Location: Northwich, Cheshire

Re: Lanchester piston set available

Post by grahamemmett » Tue Aug 21, 2018 11:34 pm

Very helpful, thank you Stan
Graham Emmett
Northwich, Cheshire
DB18 1949 LCV522 (Yes that one with the P100s)

Post Reply