Rear end key

Post Reply
User avatar
Feathers
Posts: 62
Joined: Wed May 11, 2016 3:39 pm
Location: New York USA

Rear end key

Post by Feathers » Wed Jun 13, 2018 2:10 pm

Hello All
Dose anyone know the dimensions of the key that goes in the tapered hub on the Salisbury rear end?
A close friend of mine is a great tool guy and has done me a lot of favors over the years and there is no sense in him stopping now.
I found this one in the US but don’t know if it’s the right one.

http://xks.com/i-7081678-jaguar-axle-key-co-7356.html

Thanks
John

silverdart
Posts: 125
Joined: Sat Feb 13, 2016 10:49 am
Location: West Midlands

Re: Rear end key

Post by silverdart » Thu Jun 14, 2018 10:35 am

Hi John, The key is 1/4in. square x 1 3/4in. long. Parallel.

Dave.

silverdart
Posts: 125
Joined: Sat Feb 13, 2016 10:49 am
Location: West Midlands

Re: Rear end key

Post by silverdart » Thu Jun 14, 2018 10:42 am

Sorry John, I did not look at the link before I replied.
The key shown may well be correct and will probably be 2in. long. The extra 1/4in. will include the chamfered portion on the end.

Dave.

User avatar
Feathers
Posts: 62
Joined: Wed May 11, 2016 3:39 pm
Location: New York USA

Re: Rear end key

Post by Feathers » Thu Jun 14, 2018 1:54 pm

silverdart wrote:
Thu Jun 14, 2018 10:42 am
Sorry John, I did not look at the link before I replied.
The key shown may well be correct and will probably be 2in. long. The extra 1/4in. will include the chamfered portion on the end.

Dave.
Thanks for the info Dave, that helps me out.

Cheers
John

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests