If you would like to join the DLOC, please visit the Club's website https://www.dloc.org.uk/
Please don't post someone's email address. Some people don't want to risk it being harvested by spambots and GDPR regulations discourage it.
Always look at "ACTIVE TOPICS" which gives all posts in date & time order if you can't find a post as topics are sometimes moved; or look at "Your Posts".
Reg. nrs. Please add reg. nr. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.

V8-250 Saloon: Wiring Block Connectors

classiclife
Posts: 705
Joined: Wed Sep 05, 2018 9:55 am
Location: Ridgewood - East Sussex
Contact:

V8-250 Saloon: Wiring Block Connectors

Post by classiclife »

Hello,

At some stage, sooner rather than later, I will be looking to replace and improve the wiring block connectors located on the LH and RH wings along with the associated wires. As you can see from the photos they are not dreadful, but nor are they brilliant either.

The saloon has a 20x way block connector and a 10x way unit.

My understanding is that neither blocks are available, although Holden doing something similar (5x way connector ref 080.263) you can do the maths on that !!

Of course this is not a bundle of single straight through connectors, but in many cases 2x wires in at the top resulting in 1x wire only coming out at the bottom; hence the complexity of these units. I think the 20x way block connector deals with 14x wires in total, I cannot recall the number of wires on the smaller block.

I am interested to hear if any saloon owner has tackled this problem and if so the outcome, please.

Any information, gratefully appreciated.

Thank you.

Richard.
Attachments
DSC00360.JPG
DSC00358 (2).JPG
1968 Daimler V8-250 Saloon
DLOC East Sussex Area Representative.

Southern Classics Society Events Co-ordinator.
www.southernclassics.org.uk

Big Col
Posts: 484
Joined: Tue Feb 16, 2016 12:45 pm
Location: Leeds

Re: V8-250 Saloon: Wiring Block Connectors

Post by Big Col »

I’m not a saloon owner but have dabbled with re wiring other cars.
Try Auto sparks of Derby. I think they may have the connection blocks. If not, like Holden, they may have similar.
The main thing is though that they do box sets of Lucar connects and the crimping pliers to do a very good period looking replacement.
Colin,
I may be slow but I’m rough as well !

armstrong whitworth
Posts: 17
Joined: Wed Mar 16, 2016 10:59 pm

Re: V8-250 Saloon: Wiring Block Connectors

Post by armstrong whitworth »

Hello Richard

Have you tried SC Parts - I think I bought some from them a few years ago. Their site certainly shows them and they're priced relatively reasonably, although I've not checked whether they're in stock.

https://www.scparts.co.uk/sc_en/british ... -loom.html

classiclife
Posts: 705
Joined: Wed Sep 05, 2018 9:55 am
Location: Ridgewood - East Sussex
Contact:

Re: V8-250 Saloon: Wiring Block Connectors

Post by classiclife »

Many thanks Colin and AW - your assistance & replies are very much appreciated.

I'm on the case and will report back in due course; SC Parts are not far from me; it will cost far less in fuel than it will with their p&p at about £12.70 !!

Best wishes.

Richard.
1968 Daimler V8-250 Saloon
DLOC East Sussex Area Representative.

Southern Classics Society Events Co-ordinator.
www.southernclassics.org.uk

daimlerfan
Posts: 58
Joined: Sat Feb 13, 2016 11:43 pm
Location: London

Re: V8-250 Saloon: Wiring Block Connectors

Post by daimlerfan »

Hi,
I have renewed most of the under bonnet and wheel arch wiring and incorporated modern snap connectors and an additional fuse box.
The only bullet connectors I have left are the ones to the windscreen wiper motor as I had previously restored the motor and renewed all the bullet connectors at that time.
See Pics
Attachments
IMG_0090.jpeg
IMG_0084.jpeg
IMG_0083.jpeg
IMG_0082.jpeg
1969 Daimler V8 250

daimlerfan
Posts: 58
Joined: Sat Feb 13, 2016 11:43 pm
Location: London

Re: V8-250 Saloon: Wiring Block Connectors

Post by daimlerfan »

This can be a logistical nighmare unless you label all the wires
IMG_0001.jpeg
and I replaced them with correctly coded wire as to the wiring diagram.
Attachments
IMG_0040.jpeg
IMG_0028.jpeg
IMG_0025.jpeg
1969 Daimler V8 250

lomh 13
Posts: 37
Joined: Thu Jan 12, 2017 11:48 am
Location: France

Re: V8-250 Saloon: Wiring Block Connectors

Post by lomh 13 »

It's a good idea to replace these connectors, but at the same time I take the opportunity to install relays to control the headlights

classiclife
Posts: 705
Joined: Wed Sep 05, 2018 9:55 am
Location: Ridgewood - East Sussex
Contact:

Re: V8-250 Saloon: Wiring Block Connectors

Post by classiclife »

Many thanks for additional thread updates - very useful and noted.

Best wishes.

Richard.
1968 Daimler V8-250 Saloon
DLOC East Sussex Area Representative.

Southern Classics Society Events Co-ordinator.
www.southernclassics.org.uk

Paul0123
Posts: 12
Joined: Tue Nov 07, 2017 9:52 pm
Location: Preston England

Re: V8-250 Saloon: Wiring Block Connectors

Post by Paul0123 »

Richard Sorry i am late to the party here, I replaced my multi connectors last winter as original as possible to the Eye, happy to discuss on the phone paul 079269645679, or i could be typing for ever!

Thanks for your help in the past Paul

classiclife
Posts: 705
Joined: Wed Sep 05, 2018 9:55 am
Location: Ridgewood - East Sussex
Contact:

Re: V8-250 Saloon: Wiring Block Connectors

Post by classiclife »

Thanks Paul,

It's a job that is a little way off yet and still considering my options; I will give you a call towards the end of the week if that is suitable ??

Not late to the party - good timing !!

Best wishes.

Richard.
1968 Daimler V8-250 Saloon
DLOC East Sussex Area Representative.

Southern Classics Society Events Co-ordinator.
www.southernclassics.org.uk

Post Reply