I am about planning to remove the sump on a spare engine to clean and check the bottom end, I am aware that the two end cork gaskets are available to purchase, but speaking to Barratts about the gaskets for each side on the flat surfaces they do not list them. Any suggestions apart from making them?
Bill Bright.
Please visit the Club's website https://www.dloc.org.uk/ to join. Visit https://www.dloc.org.uk/adhoc to DONATE towards the cost of the forum.
Please don't post someone's email address to avoid it being harvested by spambots and it's against GDPR regulations.
Always look at "ACTIVE TOPICS" to see all posts in date & time order as they are sometimes moved; or look at "Your Posts".
Please add Reg. nrs. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.
CHANGED YOUR EMAIL ADDRESS since registering?, click your username and check your address in User Control Panel, Profile, Account Settings.
If you want help to register, use "contact us" at page bottom for help.
Please don't post someone's email address to avoid it being harvested by spambots and it's against GDPR regulations.
Always look at "ACTIVE TOPICS" to see all posts in date & time order as they are sometimes moved; or look at "Your Posts".
Please add Reg. nrs. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.
CHANGED YOUR EMAIL ADDRESS since registering?, click your username and check your address in User Control Panel, Profile, Account Settings.
If you want help to register, use "contact us" at page bottom for help.
Daimler 250 Saloon Sump Gaskets
-
ShandyandLady
- Posts: 14
- Joined: Thu Nov 10, 2016 5:26 pm
- Location: Swansea
Re: Daimler 250 Saloon Sump Gaskets
David Manners can supply rubber gaskets which are easier to fit as they have a natural curve.
You will have to cut one to fit.
Hope this helps, Chris
You will have to cut one to fit.
Hope this helps, Chris
-
ShandyandLady
- Posts: 14
- Joined: Thu Nov 10, 2016 5:26 pm
- Location: Swansea
Re: Daimler 250 Saloon Sump Gaskets
Hi Chris,
I appreciate that the curved end gaskets are available from David Manners, but my query was for the gaskets each side of the sump/crankcase.
I can remember you used to be able to buy a "bottom end" set of gaskets for many vehicles, alas no more!
Bill Bright.
I appreciate that the curved end gaskets are available from David Manners, but my query was for the gaskets each side of the sump/crankcase.
I can remember you used to be able to buy a "bottom end" set of gaskets for many vehicles, alas no more!
Bill Bright.
-
daimlersteve
- Helpful Person
- Posts: 496
- Joined: Wed Mar 09, 2016 11:20 am
Re: Daimler 250 Saloon Sump Gaskets
I MUST BE CONFUSED, HAVING NEVER SEEN ONE .
STEVE
STEVE
Re: Daimler 250 Saloon Sump Gaskets
Hi Bill
The sump is a face fit no gasket, only each end.
I use Wellseal jointing compound, its a well known quality non Hardening compound.
Use a brush its just like treacle.
Chris
The sump is a face fit no gasket, only each end.
I use Wellseal jointing compound, its a well known quality non Hardening compound.
Use a brush its just like treacle.
Chris
-
ShandyandLady
- Posts: 14
- Joined: Thu Nov 10, 2016 5:26 pm
- Location: Swansea
Re: Daimler 250 Saloon Sump Gaskets
Thank you Chris.
Regards,
Bill.
Regards,
Bill.