Hi.
Can any of you guys give me some advice in how to terminate the ends of these gutters on a Darts hood?
I'm at the stage I have the hood temporarily stapled to the underside of the wooden beam. I know I still have to fit a strip of mohair hood material on the hood-latch side where the metal hood frame screws to the wood but I want to understand how to tie these ends in before I start to fix it all down permanently.
Descriptions, instructions and photos all appreciated.
Thanks guys.
Andy Middleditch
Please visit the Club's website https://www.dloc.org.uk/ to join. Visit https://www.dloc.org.uk/adhoc to DONATE towards the cost of the forum.
Please don't post someone's email address to avoid it being harvested by spambots and it's against GDPR regulations.
Always look at "ACTIVE TOPICS" to see all posts in date & time order as they are sometimes moved; or look at "Your Posts".
Please add Reg. nrs. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.
CHANGED YOUR EMAIL ADDRESS since registering?, click your username and check your address in User Control Panel, Profile, Account Settings.
If you want help to register, use "contact us" at page bottom for help.
Please don't post someone's email address to avoid it being harvested by spambots and it's against GDPR regulations.
Always look at "ACTIVE TOPICS" to see all posts in date & time order as they are sometimes moved; or look at "Your Posts".
Please add Reg. nrs. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.
CHANGED YOUR EMAIL ADDRESS since registering?, click your username and check your address in User Control Panel, Profile, Account Settings.
If you want help to register, use "contact us" at page bottom for help.
Fitting Dart hood
-
- Posts: 34
- Joined: Mon Feb 22, 2016 10:52 pm
- Location: Ayrshire, Scotland
Fitting Dart hood
- Attachments
-
- image.jpeg (105.18 KiB) Viewed 1222 times
-
- image.jpeg (101.94 KiB) Viewed 1222 times
Regards,
Andy Middleditch
'B' spec Dart.
Andy Middleditch
'B' spec Dart.
- Marc Mears
- Posts: 84
- Joined: Tue Feb 16, 2016 3:53 pm
Re: Fitting Dart hood
i have the same problem -but i put press stud on the ends and the male one is fixed to the underside of the wood header
Marc
Marc
Daimler Dart. Healey 3000 Mk3. VW T2 Camper. BMW 2002tii. 996 Turbo. BMW Z3M. Hillman Tilly. Rolls Royce 20/25. XK 150 ots .BMW 3.0 CSL 73. Sunbeam Alpine Mk3.Morris 8 Tourer. 97 XK8 Convertible.Alfa Romeo Giulietta. Citroen Mehari