Please visit the Club's website https://www.dloc.org.uk/ to join. Visit https://www.dloc.org.uk/adhoc to DONATE towards the cost of the forum.
Please don't post someone's email address to avoid it being harvested by spambots and it's against GDPR regulations.
Always look at "ACTIVE TOPICS" to see all posts in date & time order as they are sometimes moved; or look at "Your Posts".
Please add Reg. nrs. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.
CHANGED YOUR EMAIL ADDRESS since registering?, click your username and check your address in User Control Panel, Profile, Account Settings.
If you want help to register, use "contact us" at page bottom for help.

V8 250 interior

Post Reply
Ronniet55
Posts: 51
Joined: Thu Jul 27, 2017 3:46 pm
Location: Upminster, Essex

V8 250 interior

Post by Ronniet55 »

Hi Guys, please excuse my ignorance (again) but can anybody tell me how to remove & refit new furflex door seals?
regards
Ron

Chris S
Posts: 22
Joined: Sun Aug 27, 2017 12:17 pm
Location: Purley, Surrey

Re: V8 250 interior

Post by Chris S »

Hi the furflex is either glued or glued and nailed. So remove nails and ease off with a knife. There are channels around the door openings that contain a hard rubber (at least it looks like rubber) to which the furflex is nailed. I used half inch tacks.
Best rgds
Chris s
V8 Saloon Registrar

Ronniet55
Posts: 51
Joined: Thu Jul 27, 2017 3:46 pm
Location: Upminster, Essex

Re: V8 250 interior

Post by Ronniet55 »

Thanks Chris

Post Reply