I also make my own.
Having purchased a sheet of 3mm. thick neoprene. You can cut them the same width as the cylinder head land and they are definitely re-usable.
Also the residue from the middle can be used to make other gaskets.
Dave.
Please visit the Club's website https://www.dloc.org.uk/ to join. Visit https://www.dloc.org.uk/adhoc to DONATE towards the cost of the forum.
Please don't post someone's email address to avoid it being harvested by spambots and it's against GDPR regulations.
Always look at "ACTIVE TOPICS" to see all posts in date & time order as they are sometimes moved; or look at "Your Posts".
Please add Reg. nrs. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.
CHANGED YOUR EMAIL ADDRESS since registering?, click your username and check your address in User Control Panel, Profile, Account Settings.
If you want help to register, use "contact us" at page bottom for help.
Please don't post someone's email address to avoid it being harvested by spambots and it's against GDPR regulations.
Always look at "ACTIVE TOPICS" to see all posts in date & time order as they are sometimes moved; or look at "Your Posts".
Please add Reg. nrs. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.
CHANGED YOUR EMAIL ADDRESS since registering?, click your username and check your address in User Control Panel, Profile, Account Settings.
If you want help to register, use "contact us" at page bottom for help.
Rocker cover gaskets
-
silverdart
- Posts: 285
- Joined: Sat Feb 13, 2016 10:49 am
- Location: West Midlands
-
Alpine Daimler
- Posts: 189
- Joined: Thu Feb 18, 2016 2:17 pm
- Location: A tad west of Hamburg on the Elbe River
Re: Rocker cover gaskets
Many thanks Dave and Clive, two very good ideas.
I have since used Nicks idea which I hope to put to the test shortly when other minor projects left over from "winter refit" are complete!
Rob C.
I have since used Nicks idea which I hope to put to the test shortly when other minor projects left over from "winter refit" are complete!
Rob C.