Page 1 of 1

Rear end key

Posted: Wed Jun 13, 2018 2:10 pm
by Feathers
Hello All
Dose anyone know the dimensions of the key that goes in the tapered hub on the Salisbury rear end?
A close friend of mine is a great tool guy and has done me a lot of favors over the years and there is no sense in him stopping now.
I found this one in the US but don’t know if it’s the right one.

http://xks.com/i-7081678-jaguar-axle-key-co-7356.html

Thanks
John

Re: Rear end key

Posted: Thu Jun 14, 2018 10:35 am
by silverdart
Hi John, The key is 1/4in. square x 1 3/4in. long. Parallel.

Dave.

Re: Rear end key

Posted: Thu Jun 14, 2018 10:42 am
by silverdart
Sorry John, I did not look at the link before I replied.
The key shown may well be correct and will probably be 2in. long. The extra 1/4in. will include the chamfered portion on the end.

Dave.

Re: Rear end key

Posted: Thu Jun 14, 2018 1:54 pm
by Feathers
silverdart wrote: Thu Jun 14, 2018 10:42 am Sorry John, I did not look at the link before I replied.
The key shown may well be correct and will probably be 2in. long. The extra 1/4in. will include the chamfered portion on the end.

Dave.
Thanks for the info Dave, that helps me out.

Cheers
John