Page 1 of 1

SU Carburettor tuning v8 saloon

Posted: Sat Aug 11, 2018 10:17 pm
by pertonjohn
Could anyone recommend a carburettor tuning specialist in the west midlands area please.

Re: SU Carburettor tuning v8 saloon

Posted: Sun Aug 12, 2018 11:23 am
by silverdart
Hi, I do not know of a specialist, but I have always found it quite easy to tune the S U,s.
Are you in Perton, if so perhaps I could help you.
What issues do you have?

Dave.

Re: SU Carburettor tuning v8 saloon

Posted: Sun Aug 12, 2018 9:22 pm
by captain bobo
I am assuming that you ask the question because you are not confident tuning them yourself. I have a copy of the SU tuning manual which describes in good detail how to tune the carbs fitted to the V8 2.5 & V8 250 saloons.

If it helps I could email you copies of the appropriate pages. It really isn't a difficult job.

Re: SU Carburettor tuning v8 saloon

Posted: Tue Aug 14, 2018 9:01 pm
by Dobbinridesagain
And a balancer makes the job much easier.
I've always used this one
https://www.ebay.co.uk/itm/uni-syn-edel ... Sw~9Fbce-5

Moss also have it
https://www.moss-europe.co.uk/carburett ... 6-200.html

Ivor

Re: SU Carburettor tuning v8 saloon

Posted: Wed Aug 15, 2018 5:39 pm
by RadfordJim
This is a similar thread from a few months ago.

viewtopic.php?f=34&t=3468

Re: SU Carburettor tuning v8 saloon

Posted: Wed Aug 15, 2018 8:02 pm
by Alpine Daimler
I am assuming that you ask the question because you are not confident tuning them yourself. I have a copy of the SU tuning manual which describes in good detail how to tune the carbs fitted to the V8 2.5 & V8 250 saloons.

If it helps I could email you copies of the appropriate pages. It really isn't a difficult job.


Hello Dave,

I have sent you a message via this forum regarding this matter, I would like some copies if you have the time to scan and mail to me.

Regards
Rob C