Please visit the Club's website https://www.dloc.org.uk/ to join. Visit https://www.dloc.org.uk/adhoc to DONATE towards the cost of the forum.
Please don't post someone's email address to avoid it being harvested by spambots and it's against GDPR regulations.
Always look at "ACTIVE TOPICS" to see all posts in date & time order as they are sometimes moved; or look at "Your Posts".
Please add Reg. nrs. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.
CHANGED YOUR EMAIL ADDRESS since registering?, click your username and check your address in User Control Panel, Profile, Account Settings.
If you want help to register, use "contact us" at page bottom for help.
Please don't post someone's email address to avoid it being harvested by spambots and it's against GDPR regulations.
Always look at "ACTIVE TOPICS" to see all posts in date & time order as they are sometimes moved; or look at "Your Posts".
Please add Reg. nrs. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.
CHANGED YOUR EMAIL ADDRESS since registering?, click your username and check your address in User Control Panel, Profile, Account Settings.
If you want help to register, use "contact us" at page bottom for help.
V8 oil filter conversion
Re: V8 oil filter conversion
Is that because you live in Cheshire Graham Try your nearest Andrew Page or eurocar parts for a better price.
Colin,
I may be slow but I’m rough as well !
I may be slow but I’m rough as well !
-
- Chief Geek
- Posts: 1361
- Joined: Mon Feb 08, 2016 8:12 pm
- Location: Northwich, Cheshire
- Contact:
Re: V8 oil filter conversion
Graham Emmett ¦ DLOC Chairman ¦ chair@dloc.co.uk ¦ 07967 109160
Northwich, Cheshire
DB18 1949 LCV522 (Yes that one with the P100s)
Northwich, Cheshire
DB18 1949 LCV522 (Yes that one with the P100s)
-
- Posts: 67
- Joined: Sun Mar 20, 2016 7:59 pm
- Location: Gloucestershire UK
Re: V8 oil filter conversion
Stupid question I'm sure, but I'm not finding it easy to fit the kit I bought some time ago for my V8 saloon. I can't remove the 'anchor insert' from the 'filter head' which appears to be screwed in tight, access is poor and there's no room to get any leverage. Any hints? I assume it's a normal thread?
Thanks.
Thanks.
-
- Classic Wise Man
- Posts: 1601
- Joined: Wed Sep 05, 2018 9:55 am
- Location: Ridgewood - East Sussex
- Contact:
Re: V8 oil filter conversion
Hello,
Yes it is normal thread and some come away easily whilst others put up a fight.
May be worth tightening, which goes against the grain logically, but quite often this can assist.
The other option is remove the filter head and bench work it, which will give you better access and leverage.
Hopefully, it has not been previously cross thread althoug I doubt that.
Removing the housing from the car may be the simplest and quickest option.
Good luck.
Richard.
Yes it is normal thread and some come away easily whilst others put up a fight.
May be worth tightening, which goes against the grain logically, but quite often this can assist.
The other option is remove the filter head and bench work it, which will give you better access and leverage.
Hopefully, it has not been previously cross thread althoug I doubt that.
Removing the housing from the car may be the simplest and quickest option.
Good luck.
Richard.
1968 Daimler V8-250 Saloon
DLOC East Sussex Branch Secretary
DLOC 2.5L V8 & V8-250 Registrar - https://www.dloc.org.uk/v8-250
DLOC 2024 International Rally - https://www.dloc.org.uk/rally-2024
DLOC East Sussex Branch Secretary
DLOC 2.5L V8 & V8-250 Registrar - https://www.dloc.org.uk/v8-250
DLOC 2024 International Rally - https://www.dloc.org.uk/rally-2024
-
- Posts: 67
- Joined: Sun Mar 20, 2016 7:59 pm
- Location: Gloucestershire UK
Re: V8 oil filter conversion
Thanks Richard.
Not sure removing the filter head is simple either - looks like it would require removing the manifold and exhaust downpipe just to get access to the bolts!
What tool would you use to loosen or tighten it? I have lent on it with a 9" screwdriver though the hole, and bent the screwdriver, but can't get any more leverage with the room available.
Not sure removing the filter head is simple either - looks like it would require removing the manifold and exhaust downpipe just to get access to the bolts!
What tool would you use to loosen or tighten it? I have lent on it with a 9" screwdriver though the hole, and bent the screwdriver, but can't get any more leverage with the room available.
-
- Classic Wise Man
- Posts: 1601
- Joined: Wed Sep 05, 2018 9:55 am
- Location: Ridgewood - East Sussex
- Contact:
Re: V8 oil filter conversion
Mmmm, that is in tight - almost too tight to be correct.
The hole will need to be occupied by the widest possible piece of metal rod with absolute minimal slack - the more metal in the hole the better the chance of ensuring all your energy is transferred to the rod without bending which in turn places more pressure on the "anchor insert".
If you have any Plus Gas to hand, it will be worth spraying that against the thread a few times and letting it soak in. WD40 will be a poor second but if no Plus Gas, it is better than nothing.
A friend of mine had a similar issue recently. I will ask him what he used and get back to you tomorrow - hopefully you will have had a result by then.
Regards.
Richard.
The hole will need to be occupied by the widest possible piece of metal rod with absolute minimal slack - the more metal in the hole the better the chance of ensuring all your energy is transferred to the rod without bending which in turn places more pressure on the "anchor insert".
If you have any Plus Gas to hand, it will be worth spraying that against the thread a few times and letting it soak in. WD40 will be a poor second but if no Plus Gas, it is better than nothing.
A friend of mine had a similar issue recently. I will ask him what he used and get back to you tomorrow - hopefully you will have had a result by then.
Regards.
Richard.
1968 Daimler V8-250 Saloon
DLOC East Sussex Branch Secretary
DLOC 2.5L V8 & V8-250 Registrar - https://www.dloc.org.uk/v8-250
DLOC 2024 International Rally - https://www.dloc.org.uk/rally-2024
DLOC East Sussex Branch Secretary
DLOC 2.5L V8 & V8-250 Registrar - https://www.dloc.org.uk/v8-250
DLOC 2024 International Rally - https://www.dloc.org.uk/rally-2024
-
- Chief Geek
- Posts: 1361
- Joined: Mon Feb 08, 2016 8:12 pm
- Location: Northwich, Cheshire
- Contact:
Re: V8 oil filter conversion
Mine has just arrived
No idea why it’s sideways
(Although not fir a V8, mines a DB18)No idea why it’s sideways
Graham Emmett ¦ DLOC Chairman ¦ chair@dloc.co.uk ¦ 07967 109160
Northwich, Cheshire
DB18 1949 LCV522 (Yes that one with the P100s)
Northwich, Cheshire
DB18 1949 LCV522 (Yes that one with the P100s)
-
- Classic Wise Man
- Posts: 1601
- Joined: Wed Sep 05, 2018 9:55 am
- Location: Ridgewood - East Sussex
- Contact:
Re: V8 oil filter conversion
That's Windows 10 for you Graham, if that is your current programme !!
Am I correct in saying that the installation sheet also states a selection of spin-on filters that can be used ??
It looks as though you have a Mann 916/1 which is the same type used on the V8-250 saloon and certainly on mine.
Best wishes.
Richard.
Am I correct in saying that the installation sheet also states a selection of spin-on filters that can be used ??
It looks as though you have a Mann 916/1 which is the same type used on the V8-250 saloon and certainly on mine.
Best wishes.
Richard.
1968 Daimler V8-250 Saloon
DLOC East Sussex Branch Secretary
DLOC 2.5L V8 & V8-250 Registrar - https://www.dloc.org.uk/v8-250
DLOC 2024 International Rally - https://www.dloc.org.uk/rally-2024
DLOC East Sussex Branch Secretary
DLOC 2.5L V8 & V8-250 Registrar - https://www.dloc.org.uk/v8-250
DLOC 2024 International Rally - https://www.dloc.org.uk/rally-2024
Re: V8 oil filter conversion
Due to the very tight space in my TVR I made a special tool out of threaded rod that looked like a ?. On the bottom I threaded to nuts against each other tight and welded them to the ?. I then hooked the top of the ? through the hole and used a breaker bar with a corresponding socket on the nuts. It took a sharp hard tug on the breaker bar to loosen it.
-
- Classic Wise Man
- Posts: 1601
- Joined: Wed Sep 05, 2018 9:55 am
- Location: Ridgewood - East Sussex
- Contact:
Re: V8 oil filter conversion
Hello Patrick,
Spoke with my colleague about his tussle with the anchor insert.
In the end, he used a 3/8" extension bar through the anchor hole and then with another bar he used that to sit on against the extension bar in the hole and whack it with a club hammer - it took a few attempts but it did give in the end.
His other 2x pending options were:
1- a 12 star or similar socket of 21mm size to wedge over the anchor by tapping it in to situ and then use a breaker bar to apply the torque needed make the insert shift. He says he tried an Imperial socket but not snug enough, hence the metric socket;
2- screw a threaded bolt in to the insert, secure with a small spot weld and then set a socket on to the bolt, again using the breaker bar doing what it does best !!
The suggestion that Sonus has provided is another good alternative; just depends what tooling you have to hand.
Hope that assists ??
Regards.
Richard.
Spoke with my colleague about his tussle with the anchor insert.
In the end, he used a 3/8" extension bar through the anchor hole and then with another bar he used that to sit on against the extension bar in the hole and whack it with a club hammer - it took a few attempts but it did give in the end.
His other 2x pending options were:
1- a 12 star or similar socket of 21mm size to wedge over the anchor by tapping it in to situ and then use a breaker bar to apply the torque needed make the insert shift. He says he tried an Imperial socket but not snug enough, hence the metric socket;
2- screw a threaded bolt in to the insert, secure with a small spot weld and then set a socket on to the bolt, again using the breaker bar doing what it does best !!
The suggestion that Sonus has provided is another good alternative; just depends what tooling you have to hand.
Hope that assists ??
Regards.
Richard.
1968 Daimler V8-250 Saloon
DLOC East Sussex Branch Secretary
DLOC 2.5L V8 & V8-250 Registrar - https://www.dloc.org.uk/v8-250
DLOC 2024 International Rally - https://www.dloc.org.uk/rally-2024
DLOC East Sussex Branch Secretary
DLOC 2.5L V8 & V8-250 Registrar - https://www.dloc.org.uk/v8-250
DLOC 2024 International Rally - https://www.dloc.org.uk/rally-2024