Please don't post someone's email address or, if you must, put spaces around the @ or change @ to (at). Some people don't want to risk it being harvested by spambots.
Always look at "ACTIVE TOPICS" which gives all posts in date & time order if you can't find a post or "Your Posts", as topics are sometimes moved.
Reg. nrs. Please add reg. nr. when posting a photo or anything about a car as this will help searches. Don't add punctuation after nr. as this negates search.
New sub-forum Club Documents & Information for DLOC members only. If you can't see the new sub-forum (inside DLOC Forum: Club & Branch News), please email John-B .

SP250 V8 Spark plug leads

Paul Edginton
Posts: 26
Joined: Sun Feb 14, 2016 1:56 am

Re: SP250 V8 Spark plug leads

Post by Paul Edginton » Tue Jan 29, 2019 8:52 pm

They are only available from the Parts Club and you have to be a member. The ring cost about NZ$50.
You would have to also change the HT to plug in ends to suit the new cap.
Cheers
Paul

David S
Posts: 181
Joined: Sun Feb 21, 2016 9:23 am
Location: Forest of Dean

Re: SP250 V8 Spark plug leads

Post by David S » Tue Jan 29, 2019 9:54 pm

any chance of better pictures of this 'adapter plate' for Rover distributor cap please?

Paul Edginton
Posts: 26
Joined: Sun Feb 14, 2016 1:56 am

Re: SP250 V8 Spark plug leads

Post by Paul Edginton » Wed Jan 30, 2019 8:36 am

I will take it off tomorrow for better photos

Warsash 2
Posts: 232
Joined: Sun Feb 28, 2016 1:53 pm

Re: SP250 V8 Spark plug leads

Post by Warsash 2 » Wed Jan 30, 2019 12:24 pm

Hi
I fitted the ring when I fitted electronic ignition on both the Dart and the V8 saloon. The ring you are looking for can be obtained from Lumination.
Regards

Colin

Paul Edginton
Posts: 26
Joined: Sun Feb 14, 2016 1:56 am

Re: SP250 V8 Spark plug leads

Post by Paul Edginton » Fri Feb 01, 2019 1:36 am

P1030034.JPG
P1030038.JPG
P1030035.JPG
I hope these photos are OK :)

David S
Posts: 181
Joined: Sun Feb 21, 2016 9:23 am
Location: Forest of Dean

Re: SP250 V8 Spark plug leads

Post by David S » Sat Feb 02, 2019 9:53 pm

Thank you very much!
Looks so simple.....

David

Post Reply