Please visit the Club's website https://www.dloc.org.uk/ to join. Visit https://www.dloc.org.uk/adhoc to DONATE towards the cost of the forum.
Please don't post someone's email address to avoid it being harvested by spambots and it's against GDPR regulations.
Always look at "ACTIVE TOPICS" to see all posts in date & time order as they are sometimes moved; or look at "Your Posts".
Please add Reg. nrs. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.
CHANGED YOUR EMAIL ADDRESS since registering?, click your username and check your address in User Control Panel, Profile, Account Settings.
If you want help to register, use "contact us" at page bottom for help.

SP250 V8 Spark plug leads

Paul Edginton
Posts: 48
Joined: Sun Feb 14, 2016 1:56 am

Re: SP250 V8 Spark plug leads

Post by Paul Edginton »

They are only available from the Parts Club and you have to be a member. The ring cost about NZ$50.
You would have to also change the HT to plug in ends to suit the new cap.
Cheers
Paul

David S
Posts: 188
Joined: Sun Feb 21, 2016 9:23 am
Location: Forest of Dean

Re: SP250 V8 Spark plug leads

Post by David S »

any chance of better pictures of this 'adapter plate' for Rover distributor cap please?

Paul Edginton
Posts: 48
Joined: Sun Feb 14, 2016 1:56 am

Re: SP250 V8 Spark plug leads

Post by Paul Edginton »

I will take it off tomorrow for better photos

Warsash 2
Posts: 332
Joined: Sun Feb 28, 2016 1:53 pm
Location: Southampton

Re: SP250 V8 Spark plug leads

Post by Warsash 2 »

Hi
I fitted the ring when I fitted electronic ignition on both the Dart and the V8 saloon. The ring you are looking for can be obtained from Lumination.
Regards

Colin

Paul Edginton
Posts: 48
Joined: Sun Feb 14, 2016 1:56 am

Re: SP250 V8 Spark plug leads

Post by Paul Edginton »

P1030034.JPG
P1030038.JPG
P1030035.JPG
I hope these photos are OK :)

David S
Posts: 188
Joined: Sun Feb 21, 2016 9:23 am
Location: Forest of Dean

Re: SP250 V8 Spark plug leads

Post by David S »

Thank you very much!
Looks so simple.....

David

Post Reply