Please don't post someone's email address or, if you must, put spaces around the @ or change @ to (at). Some people don't want to risk it being harvested by spambots.
Always look at "ACTIVE TOPICS" which gives all posts in date & time order if you can't find a post or "Your Posts", as topics are sometimes moved.
Reg. nrs. Please add reg. nr. when posting a photo or anything about a car as this will help searches. Don't add punctuation after nr. as this negates search.
New sub-forum Club Documents & Information for DLOC members only. If you can't see the new sub-forum (inside DLOC Forum: Club & Branch News), please email John-B .

V8-250 saloon: Headlamp Relays

Post Reply
classiclife
Posts: 191
Joined: Wed Sep 05, 2018 9:55 am
Location: Ridgewood - East Sussex
Contact:

V8-250 saloon: Headlamp Relays

Post by classiclife » Wed Feb 06, 2019 3:37 pm

Hello,

I'm upgrading the sealed beams on my V8 saloon to halogen.

The intention is to fit 2x relays and I want to ask if anyone else has done this, fitting relays that is, and if so where exactly did you break in to the wiring loom ??

The optimum break appears to be between the main / dip beam floor switch and prior to the loom splitting to the nearside and offside headlamps.

Any advice will be very much appreciated.

Thank you.

Richard.

johnwager
Posts: 40
Joined: Thu Feb 11, 2016 3:26 pm
Location: Thundersley, Essex

Re: V8-250 saloon: Headlamp Relays

Post by johnwager » Wed Feb 06, 2019 4:13 pm

Hi Richard
I haven't fitted relays to my car but I have just fitted a fuse box for the lights, which I located on the n/s inner wing where the loom splits to n/s and o/s. It seemed like the most convenient and obvious place.
John

classiclife
Posts: 191
Joined: Wed Sep 05, 2018 9:55 am
Location: Ridgewood - East Sussex
Contact:

Re: V8-250 saloon: Headlamp Relays

Post by classiclife » Wed Feb 06, 2019 5:01 pm

Hello John,

Thanks for that information, all noted.

Best wishes.

Richard.

Post Reply