Please don't post someone's email address or, if you must, put spaces around the @ or change @ to (at). Some people don't want to risk it being harvested by spambots.
Always look at "ACTIVE TOPICS" which gives all posts in date & time order if you can't find a post or "Your Posts", as topics are sometimes moved.
Reg. nrs. Please add reg. nr. when posting a photo or anything about a car as this will help searches. Don't add punctuation after nr. as this negates search.
New sub-forum Club Documents & Information for DLOC members only. If you can't see the new sub-forum (inside DLOC Forum: Club & Branch News), please email John-B .

Torque values

Post Reply
Paulkennedy
Posts: 60
Joined: Fri Feb 12, 2016 11:01 pm

Torque values

Post by Paulkennedy » Wed Feb 06, 2019 6:15 pm

Where can I find torque values for SP engine and gearbox nuts and bolts.
Paul Kennedy

fireboss
Posts: 36
Joined: Wed Feb 24, 2016 10:20 pm
Location: Whitby, Ontario

Re: Torque values

Post by fireboss » Thu Feb 07, 2019 4:46 pm

I received this from BT quite a few years ago and saved it for reference:


All the listed torque settings for the SP 250 are as follows:-
Cylinder head where studs fitted with nuts - 40/45 lbs. ft.
or where Bolts are fitted – 50/55 lbs. ft.
Connecting rod nuts – 28/30 lbs. ft.
Main bearing nuts – 25/30 lbs. ft.
Oil Sump screws – 10/13 lbs. ft.
Flywheel bolts – 43/48 lbs. ft.
Clutch to flywheel bolts – 14/16 lbs. ft.
Pinion bearing nut – 95/105 lbs. ft.
Differential bearing nuts on caps – 35/40 lbs. ft.
Crown wheel bolts – 50/60 lbs. ft.
Road wheel nuts – 60/65 lbs. ft.

Hope it helps, Bruce

Paulkennedy
Posts: 60
Joined: Fri Feb 12, 2016 11:01 pm

Re: Torque values

Post by Paulkennedy » Thu Feb 07, 2019 10:34 pm

Bruce, thank you for the info.
Paul

Post Reply