Where can I find torque values for SP engine and gearbox nuts and bolts.
Paul Kennedy
Please visit the Club's website https://www.dloc.org.uk/ to join. Visit https://www.dloc.org.uk/adhoc to DONATE towards the cost of the forum.
Please don't post someone's email address to avoid it being harvested by spambots and it's against GDPR regulations.
Always look at "ACTIVE TOPICS" to see all posts in date & time order as they are sometimes moved; or look at "Your Posts".
Please add Reg. nrs. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.
CHANGED YOUR EMAIL ADDRESS since registering?, click your username and check your address in User Control Panel, Profile, Account Settings.
If you want help to register, use "contact us" at page bottom for help.
Please don't post someone's email address to avoid it being harvested by spambots and it's against GDPR regulations.
Always look at "ACTIVE TOPICS" to see all posts in date & time order as they are sometimes moved; or look at "Your Posts".
Please add Reg. nrs. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.
CHANGED YOUR EMAIL ADDRESS since registering?, click your username and check your address in User Control Panel, Profile, Account Settings.
If you want help to register, use "contact us" at page bottom for help.
Torque values
Re: Torque values
I received this from BT quite a few years ago and saved it for reference:
All the listed torque settings for the SP 250 are as follows:-
Cylinder head where studs fitted with nuts - 40/45 lbs. ft.
or where Bolts are fitted – 50/55 lbs. ft.
Connecting rod nuts – 28/30 lbs. ft.
Main bearing nuts – 25/30 lbs. ft.
Oil Sump screws – 10/13 lbs. ft.
Flywheel bolts – 43/48 lbs. ft.
Clutch to flywheel bolts – 14/16 lbs. ft.
Pinion bearing nut – 95/105 lbs. ft.
Differential bearing nuts on caps – 35/40 lbs. ft.
Crown wheel bolts – 50/60 lbs. ft.
Road wheel nuts – 60/65 lbs. ft.
Hope it helps, Bruce
All the listed torque settings for the SP 250 are as follows:-
Cylinder head where studs fitted with nuts - 40/45 lbs. ft.
or where Bolts are fitted – 50/55 lbs. ft.
Connecting rod nuts – 28/30 lbs. ft.
Main bearing nuts – 25/30 lbs. ft.
Oil Sump screws – 10/13 lbs. ft.
Flywheel bolts – 43/48 lbs. ft.
Clutch to flywheel bolts – 14/16 lbs. ft.
Pinion bearing nut – 95/105 lbs. ft.
Differential bearing nuts on caps – 35/40 lbs. ft.
Crown wheel bolts – 50/60 lbs. ft.
Road wheel nuts – 60/65 lbs. ft.
Hope it helps, Bruce
-
- Posts: 135
- Joined: Fri Feb 12, 2016 11:01 pm
Re: Torque values
Bruce, thank you for the info.
Paul
Paul