Please visit the Club's website https://www.dloc.org.uk/ to join. Visit https://www.dloc.org.uk/adhoc to DONATE towards the cost of the forum.
Please don't post someone's email address to avoid it being harvested by spambots and it's against GDPR regulations.
Always look at "ACTIVE TOPICS" to see all posts in date & time order as they are sometimes moved; or look at "Your Posts".
Please add Reg. nrs. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.
CHANGED YOUR EMAIL ADDRESS since registering?, click your username and check your address in User Control Panel, Profile, Account Settings.
If you want help to register, use "contact us" at page bottom for help.

250 v8 rear hub removal (i hope)

Ian Slade
Wise Man
Wise Man
Posts: 791
Joined: Sat Feb 13, 2016 9:54 am
Location: Sevilla Spain

Re: 250 v8 rear hub removal (i hope)

Post by Ian Slade »

One could use the marine system for removing propellers, drill a small hole in the half shaft of a length to be half way into the taper, then cross drill into the longitudinal hole, tap a thread into the longitudinal hole to fit a hydraulic union. To remove the hub next time pump oil or grease into the hole to between 5000 to 10000psi using an Enerpac and it should fall off. Drill size is 2-3mm
Owner since the 70's, Genghis is slightly to my left.

Ian Hastings
Posts: 163
Joined: Tue Mar 15, 2016 3:00 pm

Re: 250 v8 rear hub removal (i hope)

Post by Ian Hastings »

guitarman1951 wrote: Tue Apr 23, 2019 2:14 am Hi Graham,
The wonderful tool is a copy of the original Churchill JD-1 tool, "Martin Robey Ltd "has them listed part no. 204-011 ---- £254.17. I am trying to get one made!. regards Brian
As stated earlier in the thread I have a five legged hydraulic puller which does the job admirably.

I'm offering it for sale for £50.00 plus p&p which is a considerable saving on what you propose.

Stevesv8250
Posts: 67
Joined: Tue Mar 02, 2021 10:07 am
Location: Hullbridge Essex. Uk

Re: 250 v8 rear hub removal (i hope)

Post by Stevesv8250 »

Ian Hastings wrote: Tue Apr 23, 2019 2:39 pm
guitarman1951 wrote: Tue Apr 23, 2019 2:14 am Hi Graham,
The wonderful tool is a copy of the original Churchill JD-1 tool, "Martin Robey Ltd "has them listed part no. 204-011 ---- £254.17. I am trying to get one made!. regards Brian
As stated earlier in the thread I have a five legged hydraulic puller which does the job admirably.

I'm offering it for sale for £50.00 plus p&p which is a considerable saving on what you propose.
Hi Ian,
Is this still available?
Steve.

Ian Hastings
Posts: 163
Joined: Tue Mar 15, 2016 3:00 pm

Re: 250 v8 rear hub removal (i hope)

Post by Ian Hastings »

Hi Steve
Yes it is but its out on loan at the moment. I can probably get it back if they are finished with it. Ian

Stevesv8250
Posts: 67
Joined: Tue Mar 02, 2021 10:07 am
Location: Hullbridge Essex. Uk

Re: 250 v8 rear hub removal (i hope)

Post by Stevesv8250 »

Ian Hastings wrote: Wed Mar 03, 2021 10:32 am Hi Steve
Yes it is but its out on loan at the moment. I can probably get it back if they are finished with it. Ian
No rush, I dont need it anytime soon only if I decide to go with wires.
Where are you in the country?
Steve.

Stevesv8250
Posts: 67
Joined: Tue Mar 02, 2021 10:07 am
Location: Hullbridge Essex. Uk

Re: 250 v8 rear hub removal (i hope)

Post by Stevesv8250 »

Ian Hastings wrote: Wed Mar 03, 2021 10:32 am Hi Steve
Yes it is but its out on loan at the moment. I can probably get it back if they are finished with it. Ian
Hi Ian,
I have sent you a PM.
Steve.

Ian Hastings
Posts: 163
Joined: Tue Mar 15, 2016 3:00 pm

Re: 250 v8 rear hub removal (i hope)

Post by Ian Hastings »

Stevesv8250 wrote: Tue Mar 09, 2021 9:18 pm
Ian Hastings wrote: Wed Mar 03, 2021 10:32 am Hi Steve
Yes it is but its out on loan at the moment. I can probably get it back if they are finished with it. Ian
Hi Ian,
I have sent you a PM.
Steve.
Hi Steve,
No PM arrived yet. I.

Stevesv8250
Posts: 67
Joined: Tue Mar 02, 2021 10:07 am
Location: Hullbridge Essex. Uk

Re: 250 v8 rear hub removal (i hope)

Post by Stevesv8250 »

Strange,
Its saying ive sent it but its un read?
I was only asking what type of puller it was and if you had a photo? Any idea of post cost to England?
Steve.

User avatar
John-B
Site Admin
Posts: 1755
Joined: Tue Feb 09, 2016 9:10 pm
Location: Salisbury, UK
Contact:

Re: 250 v8 rear hub removal (i hope)

Post by John-B »

Ian Hastings wrote: Wed Mar 10, 2021 7:48 pm
Stevesv8250 wrote: Tue Mar 09, 2021 9:18 pm
Hi Ian,
I have sent you a PM.
Steve.
Hi Steve,
No PM arrived yet. I.
Have you got a red notification icon top right near your username?

Stevesv8250
Posts: 67
Joined: Tue Mar 02, 2021 10:07 am
Location: Hullbridge Essex. Uk

Re: 250 v8 rear hub removal (i hope)

Post by Stevesv8250 »

John-B wrote: Wed Mar 10, 2021 10:03 pm
Ian Hastings wrote: Wed Mar 10, 2021 7:48 pm
Stevesv8250 wrote: Tue Mar 09, 2021 9:18 pm
Hi Ian,
I have sent you a PM.
Steve.
Hi Steve,
No PM arrived yet. I.
Have you got a red notification icon top right near your username?
Sorry but where do you mean?

Post Reply