Please visit the Club's website https://www.dloc.org.uk/ to join. Visit https://www.dloc.org.uk/adhoc to DONATE towards the cost of the forum.
Please don't post someone's email address to avoid it being harvested by spambots and it's against GDPR regulations.
Always look at "ACTIVE TOPICS" to see all posts in date & time order as they are sometimes moved; or look at "Your Posts".
Please add Reg. nrs. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.
CHANGED YOUR EMAIL ADDRESS since registering?, click your username and check your address in User Control Panel, Profile, Account Settings.
If you want help to register, use "contact us" at page bottom for help.
Please don't post someone's email address to avoid it being harvested by spambots and it's against GDPR regulations.
Always look at "ACTIVE TOPICS" to see all posts in date & time order as they are sometimes moved; or look at "Your Posts".
Please add Reg. nrs. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.
CHANGED YOUR EMAIL ADDRESS since registering?, click your username and check your address in User Control Panel, Profile, Account Settings.
If you want help to register, use "contact us" at page bottom for help.
250 v8 rear hub removal (i hope)
Re: 250 v8 rear hub removal (i hope)
One could use the marine system for removing propellers, drill a small hole in the half shaft of a length to be half way into the taper, then cross drill into the longitudinal hole, tap a thread into the longitudinal hole to fit a hydraulic union. To remove the hub next time pump oil or grease into the hole to between 5000 to 10000psi using an Enerpac and it should fall off. Drill size is 2-3mm
Owner since the 70's, Genghis is slightly to my left.
-
- Posts: 163
- Joined: Tue Mar 15, 2016 3:00 pm
Re: 250 v8 rear hub removal (i hope)
As stated earlier in the thread I have a five legged hydraulic puller which does the job admirably.guitarman1951 wrote: ↑Tue Apr 23, 2019 2:14 am Hi Graham,
The wonderful tool is a copy of the original Churchill JD-1 tool, "Martin Robey Ltd "has them listed part no. 204-011 ---- £254.17. I am trying to get one made!. regards Brian
I'm offering it for sale for £50.00 plus p&p which is a considerable saving on what you propose.
-
- Posts: 67
- Joined: Tue Mar 02, 2021 10:07 am
- Location: Hullbridge Essex. Uk
Re: 250 v8 rear hub removal (i hope)
Hi Ian,Ian Hastings wrote: ↑Tue Apr 23, 2019 2:39 pmAs stated earlier in the thread I have a five legged hydraulic puller which does the job admirably.guitarman1951 wrote: ↑Tue Apr 23, 2019 2:14 am Hi Graham,
The wonderful tool is a copy of the original Churchill JD-1 tool, "Martin Robey Ltd "has them listed part no. 204-011 ---- £254.17. I am trying to get one made!. regards Brian
I'm offering it for sale for £50.00 plus p&p which is a considerable saving on what you propose.
Is this still available?
Steve.
-
- Posts: 163
- Joined: Tue Mar 15, 2016 3:00 pm
Re: 250 v8 rear hub removal (i hope)
Hi Steve
Yes it is but its out on loan at the moment. I can probably get it back if they are finished with it. Ian
Yes it is but its out on loan at the moment. I can probably get it back if they are finished with it. Ian
-
- Posts: 67
- Joined: Tue Mar 02, 2021 10:07 am
- Location: Hullbridge Essex. Uk
Re: 250 v8 rear hub removal (i hope)
No rush, I dont need it anytime soon only if I decide to go with wires.Ian Hastings wrote: ↑Wed Mar 03, 2021 10:32 am Hi Steve
Yes it is but its out on loan at the moment. I can probably get it back if they are finished with it. Ian
Where are you in the country?
Steve.
-
- Posts: 67
- Joined: Tue Mar 02, 2021 10:07 am
- Location: Hullbridge Essex. Uk
Re: 250 v8 rear hub removal (i hope)
Hi Ian,Ian Hastings wrote: ↑Wed Mar 03, 2021 10:32 am Hi Steve
Yes it is but its out on loan at the moment. I can probably get it back if they are finished with it. Ian
I have sent you a PM.
Steve.
-
- Posts: 163
- Joined: Tue Mar 15, 2016 3:00 pm
Re: 250 v8 rear hub removal (i hope)
Hi Steve,Stevesv8250 wrote: ↑Tue Mar 09, 2021 9:18 pmHi Ian,Ian Hastings wrote: ↑Wed Mar 03, 2021 10:32 am Hi Steve
Yes it is but its out on loan at the moment. I can probably get it back if they are finished with it. Ian
I have sent you a PM.
Steve.
No PM arrived yet. I.
-
- Posts: 67
- Joined: Tue Mar 02, 2021 10:07 am
- Location: Hullbridge Essex. Uk
Re: 250 v8 rear hub removal (i hope)
Strange,
Its saying ive sent it but its un read?
I was only asking what type of puller it was and if you had a photo? Any idea of post cost to England?
Steve.
Its saying ive sent it but its un read?
I was only asking what type of puller it was and if you had a photo? Any idea of post cost to England?
Steve.
Re: 250 v8 rear hub removal (i hope)
Have you got a red notification icon top right near your username?
-
- Posts: 67
- Joined: Tue Mar 02, 2021 10:07 am
- Location: Hullbridge Essex. Uk
Re: 250 v8 rear hub removal (i hope)
Sorry but where do you mean?John-B wrote: ↑Wed Mar 10, 2021 10:03 pmHave you got a red notification icon top right near your username?