Forum registration by users has been disabled because of many problem registrations from Russia. Email mail @ chalkevalley.info (no spaces) if you wish to join the forum and an administrator will register you.
If you would like to join the DLOC, please visit the Club's website https://www.dloc.org.uk/
Please don't post someone's email address. Some people don't want to risk it being harvested by spambots and GDPR regulations discourage it.
Always look at "ACTIVE TOPICS" which gives all posts in date & time order if you can't find a post or "Your Posts", as topics are sometimes moved.
Reg. nrs. Please add reg. nr. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.

Dart fuel tank fittings

pat the dog
Posts: 10
Joined: Tue Mar 15, 2016 9:46 pm

Re: Dart fuel tank fittings

Post by pat the dog » Sat Aug 10, 2019 10:22 pm

The original factory made pickup tubes were plate, rolled and then soldered. I had a problem with a leak on mine which let in air on full power.
The pipes were of a very strange size and it required David Beales' expertise to identify and have the correct size threaded pipe. The two pipes go into a common block very close together.
I'd recommend to only have one pipe, who needs a reserve anyway?

Post Reply