Page 1 of 1
radiator fan shroud
Posted: Wed Aug 28, 2019 10:00 am
by Richard Vester
Does anyone have drawings and / or photos of a radiator fan shroud for me? This was an option on the Daimler SP250
Re: radiator fan shroud
Posted: Wed Aug 28, 2019 10:27 am
by Vortex O'Plinth
Daimler offered it as an option for countries with 'High ambient temperatures'. Other than this picture from the Spare Parts Catalogue, I'm not aware of any original drawings.
Re: radiator fan shroud
Posted: Wed Aug 28, 2019 3:17 pm
by KV8
Unfortunately no dimensions given but the drawing does not look too dissimilar to the top half of the cowl for the V8 / V8-250 saloon that is readily available. Would depend on very similar fan diameter and need some mods and mounting brackets etc but...??
HTH
H
Re: radiator fan shroud
Posted: Wed Aug 28, 2019 7:48 pm
by Ozzsp250
I brought one a couple of years back its currently in my garage attic area, will get it down and measure it....give me a couples of days.
Re: radiator fan shroud
Posted: Thu Aug 29, 2019 2:23 pm
by #100910
Christian Demler lists a fiberglass shroud among his offerings:
Re: radiator fan shroud
Posted: Sat Aug 31, 2019 10:31 pm
by Ozzsp250
Here's the fan shroud I purchased. Rather than take up forum space I have taken photos and dimensions and can email to whoever wants them.
I should note that its very basic.
Re: radiator fan shroud
Posted: Wed Sep 11, 2019 1:10 am
by Automospe
I bought one from Chris. It is made from fiberglass with a nice black finish. Installation was not complicated. It seems to work well although I haven't tried a long trip yet ( it is still hovering around 100 degrees F in Texas). I will be road tripping to Boston next month so will see how it goes. Very nice quality.