C series SP250: I want to remove the front overriders from the bumper, but it's fiendishly difficult to get a spanner in to 'do the business'. Does anyone know if there is a knack to this simple task please?
Many thanks in advance.
Please visit the Club's website https://www.dloc.org.uk/ to join. Visit https://www.dloc.org.uk/adhoc to DONATE towards the cost of the forum.
Please don't post someone's email address to avoid it being harvested by spambots and it's against GDPR regulations.
Always look at "ACTIVE TOPICS" to see all posts in date & time order as they are sometimes moved; or look at "Your Posts".
Please add Reg. nrs. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.
CHANGED YOUR EMAIL ADDRESS since registering?, click your username and check your address in User Control Panel, Profile, Account Settings.
If you want help to register, use "contact us" at page bottom for help.
Please don't post someone's email address to avoid it being harvested by spambots and it's against GDPR regulations.
Always look at "ACTIVE TOPICS" to see all posts in date & time order as they are sometimes moved; or look at "Your Posts".
Please add Reg. nrs. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.
CHANGED YOUR EMAIL ADDRESS since registering?, click your username and check your address in User Control Panel, Profile, Account Settings.
If you want help to register, use "contact us" at page bottom for help.
SP 250 overriders - removal
Re: SP 250 overriders - removal
Hi Martyn,
you'll find it much easier & simpler to take the bumper off the bumper iron first - otherwise you need double jointed fingers & spanners!
cheers,
John
you'll find it much easier & simpler to take the bumper off the bumper iron first - otherwise you need double jointed fingers & spanners!
cheers,
John
John M in Middlesex, NW London
1962 SP250 "B" Spec
DLOC Herts Region Sec
1962 SP250 "B" Spec
DLOC Herts Region Sec
-
- Extra-Wise Man
- Posts: 1065
- Joined: Fri Feb 12, 2016 8:15 pm
- Location: Gloucestershire
Re: SP 250 overriders - removal
Depending on the fit of your bumper to the iron and the fit of that to the car (and they do vary quite a bit from car to car), you might be able to remove the bolts with an offset ratchet spanner (always assuming you had access to one of the right size)....
The problem then would be if you wanted to refit the overriders .....
John's suggestion is probably the most practical.
The problem then would be if you wanted to refit the overriders .....
John's suggestion is probably the most practical.
Nick
"Don't bother with the Air & Space Museum - there's nothing to see.......".
"Don't bother with the Air & Space Museum - there's nothing to see.......".
-
- Posts: 64
- Joined: Tue Feb 02, 2016 7:46 am
Re: SP 250 overriders - removal
Thanks both for your response: nice warm weather at present so tall ho!