I am looking for a clear and sharp representation of the Daimler distributor parts diagram. Any help would be most appreciated.
By the way: Nick, your help regarding heater motor switch has worked fine.
Patrick
Please visit the Club's website https://www.dloc.org.uk/ to join. Visit https://www.dloc.org.uk/adhoc to DONATE towards the cost of the forum.
Please don't post someone's email address to avoid it being harvested by spambots and it's against GDPR regulations.
Always look at "ACTIVE TOPICS" to see all posts in date & time order as they are sometimes moved; or look at "Your Posts".
Please add Reg. nrs. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.
CHANGED YOUR EMAIL ADDRESS since registering?, click your username and check your address in User Control Panel, Profile, Account Settings.
If you want help to register, use "contact us" at page bottom for help.
Please don't post someone's email address to avoid it being harvested by spambots and it's against GDPR regulations.
Always look at "ACTIVE TOPICS" to see all posts in date & time order as they are sometimes moved; or look at "Your Posts".
Please add Reg. nrs. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.
CHANGED YOUR EMAIL ADDRESS since registering?, click your username and check your address in User Control Panel, Profile, Account Settings.
If you want help to register, use "contact us" at page bottom for help.
SP250 Distributor
Re: SP250 Distributor
I don't think there is one.
The best I could find when looking recently was on a RR forum http://au.rrforums.net/forum/messages/1 ... 1502799152, you'll need to scroll down to the relevant post:
Kevin
The best I could find when looking recently was on a RR forum http://au.rrforums.net/forum/messages/1 ... 1502799152, you'll need to scroll down to the relevant post:
Kevin
Re: SP250 Distributor
Any help ?
Re: SP250 Distributor
Dave M, Kevin... Thank you for your response, your diagrams were somewhat helpful.I am going to post photos of my distributor rebuild.
-
Reedweaver
- Posts: 93
- Joined: Sun Feb 21, 2016 2:20 pm
Re: SP250 Distributor
Thank you for these, looking at the diagrams I am missing the distance collar on my SP distributor.. 
-
John Chatfield
- Posts: 78
- Joined: Mon Feb 22, 2016 11:00 pm
- Location: Shrewsbury England
Re: SP250 Distributor
the Drawings also miss the oil seal fitted under the upper roller bearing, and also check the wick spring isn't cracked I have 3 distributors here with cracks or a twist in them and they aren't available to purchase so tomorrow I have some spring steel arriving so with a bit of luck another 'Covid 19' job gets done.