My front bumper seems to have twin spring bars (Item #3) fitted.
Are there two bars welded together to form one piece or was this a post-accident 'enhancement' by a previous owner?
(Over-riders appear to be from an E-Type.)
Please visit the Club's website https://www.dloc.org.uk/ to join. Visit https://www.dloc.org.uk/adhoc to DONATE towards the cost of the forum.
Please don't post someone's email address to avoid it being harvested by spambots and it's against GDPR regulations.
Always look at "ACTIVE TOPICS" to see all posts in date & time order as they are sometimes moved; or look at "Your Posts".
Please add Reg. nrs. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.
CHANGED YOUR EMAIL ADDRESS since registering?, click your username and check your address in User Control Panel, Profile, Account Settings.
If you want help to register, use "contact us" at page bottom for help.
Please don't post someone's email address to avoid it being harvested by spambots and it's against GDPR regulations.
Always look at "ACTIVE TOPICS" to see all posts in date & time order as they are sometimes moved; or look at "Your Posts".
Please add Reg. nrs. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.
CHANGED YOUR EMAIL ADDRESS since registering?, click your username and check your address in User Control Panel, Profile, Account Settings.
If you want help to register, use "contact us" at page bottom for help.
SP250 bumper mounts B type
-
- Extra-Wise Man
- Posts: 1065
- Joined: Fri Feb 12, 2016 8:15 pm
- Location: Gloucestershire
Re: SP250 bumper mounts B type
You are right, the front bumper mounting iron is a steel flat 2½" (63.5mm) x ¼ (6.35mm) and approximately 45" (63.5mm) long. It is bent to align with the cow horns and bumper mounting points and drilled for the mounting bolts. The bumper attaches to it at three points, one in the centre and at both ends. If you have fog and/or spot lights the bumper iron would have been drilled with holes to mount the light brackets.
Nick
"Don't bother with the Air & Space Museum - there's nothing to see.......".
"Don't bother with the Air & Space Museum - there's nothing to see.......".
Re: SP250 bumper mounts B type
Nick
Many thanks.
You have without doubt an encyclopedic knowledge when it comes to the SP250
George
Many thanks.
You have without doubt an encyclopedic knowledge when it comes to the SP250
George
Re: SP250 bumper mounts B type
For those who may be interested in the finished article please see attached picture.
Thank you all for your assistance
Thank you all for your assistance
-
- Extra-Wise Man
- Posts: 1065
- Joined: Fri Feb 12, 2016 8:15 pm
- Location: Gloucestershire
Re: SP250 bumper mounts B type
It looks as if you've got it well sorted George - congratulations.
Nick
"Don't bother with the Air & Space Museum - there's nothing to see.......".
"Don't bother with the Air & Space Museum - there's nothing to see.......".