Hi all,
Have a new indicator stalk to fit to my ‘69 saloon. I didn’t need the switch portion of it, just the stalk, which SNG Barratt had. Can anyone direct me as to the procedure to access and swap it out? Wasn’t sure that I spotted it in the workshop manual.
Please visit the Club's website https://www.dloc.org.uk/ to join. Visit https://www.dloc.org.uk/adhoc to DONATE towards the cost of the forum.
Please don't post someone's email address to avoid it being harvested by spambots and it's against GDPR regulations.
Always look at "ACTIVE TOPICS" to see all posts in date & time order as they are sometimes moved; or look at "Your Posts".
Please add Reg. nrs. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.
CHANGED YOUR EMAIL ADDRESS since registering?, click your username and check your address in User Control Panel, Profile, Account Settings.
If you want help to register, use "contact us" at page bottom for help.
Please don't post someone's email address to avoid it being harvested by spambots and it's against GDPR regulations.
Always look at "ACTIVE TOPICS" to see all posts in date & time order as they are sometimes moved; or look at "Your Posts".
Please add Reg. nrs. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.
CHANGED YOUR EMAIL ADDRESS since registering?, click your username and check your address in User Control Panel, Profile, Account Settings.
If you want help to register, use "contact us" at page bottom for help.
Indicator stalk replacement, saloon
Re: Indicator stalk replacement, saloon
Update;
Got it sorted out. Was pretty easy, just a bit fiddly dealing with the stalk return springs but just had to remove the shroud around the steering column, unhook the upper and lower stalk return/cancel springs and drive a small roll pin out which holds the stalk into the switch assembly.
Now on to sort out that nasty driveline vibration...
Got it sorted out. Was pretty easy, just a bit fiddly dealing with the stalk return springs but just had to remove the shroud around the steering column, unhook the upper and lower stalk return/cancel springs and drive a small roll pin out which holds the stalk into the switch assembly.
Now on to sort out that nasty driveline vibration...