Has anybody replaced the rear brake draw link rods dust covers that fit to the rear of the hub?
Are there any parts available or was an alternative used?
It's part no. 153 on page 85 of the parts manual.
Any help would be appreciated.
If you would like to join the DLOC, please visit the Club's website https://www.dloc.org.uk/
Please don't post someone's email address. Some people don't want to risk it being harvested by spambots and GDPR regulations discourage it.
Always look at "ACTIVE TOPICS" which gives all posts in date & time order if you can't find a post as topics are sometimes moved; or look at "Your Posts".
Reg. nrs. Please add reg. nr. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.
Please don't post someone's email address. Some people don't want to risk it being harvested by spambots and GDPR regulations discourage it.
Always look at "ACTIVE TOPICS" which gives all posts in date & time order if you can't find a post as topics are sometimes moved; or look at "Your Posts".
Reg. nrs. Please add reg. nr. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.
Regency DF304/5
-
grahamemmett
- Posts: 843
- Joined: Mon Feb 08, 2016 8:12 pm
- Location: Northwich, Cheshire
- Contact:
Re: Regency DF304/5
Have you tried David Beales?
Graham Emmett
Northwich, Cheshire
Joint DB18 Registrar (with Marcel Renshaw)
DB18 1949 LCV522 (Yes that one with the P100s)
https://www.db18.org
Northwich, Cheshire
Joint DB18 Registrar (with Marcel Renshaw)
DB18 1949 LCV522 (Yes that one with the P100s)
https://www.db18.org
-
New Dexter
- Posts: 414
- Joined: Fri Feb 12, 2016 9:41 am
Re: Regency DF304/5
I may be wrong but the Regency models might have shared their rear brake parts with Land Rovers. You could try looking for something similar on Land Rover sites
Re: Regency DF304/5
Thanks for the suggestions. I shall follow up.