Page 1 of 1
Conquest cork rocker gasket
Posted: Sun Dec 03, 2017 3:07 pm
by Phillmore
Does anyone know of a supplier that makes one of these that actually fits? Mine has at least a quarter of an inch too long!
Re: Conquest cork rocker gasket
Posted: Sun Dec 03, 2017 3:51 pm
by Warsash 2
Hi Andrew
Try David Beales shop
Regards
Colin
Re: Conquest cork rocker gasket
Posted: Sun Dec 03, 2017 6:02 pm
by Phillmore
That's where I got it from, with a note saying they stretch in storage! maybe they should be made a quarter of an inch too small in that case!
Re: Conquest cork rocker gasket
Posted: Sun Dec 03, 2017 6:06 pm
by Phillmore
So what shrinks cork? Heat, cold, damp, dry??
Re: Conquest cork rocker gasket
Posted: Mon Dec 04, 2017 9:56 am
by Stan Thomas
Make your own!
You can buy sheet cork off Ebay quite cheaply - and you only have to stand your rocker cover on it and run round with a stanley knife. Job done, fit the gasket then go off to the A & E if you've cut yourself.
Re: Conquest cork rocker gasket
Posted: Mon Dec 04, 2017 10:07 am
by Phillmore
Thanks Stan yes that would be an option. I think I will put it in the oven and see if a bit of cooking will shrink it first.