Please visit the Club's website https://www.dloc.org.uk/ to join. Visit https://www.dloc.org.uk/adhoc to DONATE towards the cost of the forum.
Please don't post someone's email address to avoid it being harvested by spambots and it's against GDPR regulations.
Always look at "ACTIVE TOPICS" to see all posts in date & time order as they are sometimes moved; or look at "Your Posts".
Please add Reg. nrs. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.
CHANGED YOUR EMAIL ADDRESS since registering?, click your username and check your address in User Control Panel, Profile, Account Settings.
If you want help to register, use "contact us" at page bottom for help.

Conquest accelerator pedal DJ254

Post Reply
User avatar
migray
Helpful Person
Helpful Person
Posts: 353
Joined: Fri Feb 26, 2016 10:31 pm
Location: Bakewell

Conquest accelerator pedal DJ254

Post by migray »

Many thanks to bakergh who helped me out when my accelerator pedal broke. The pivot end came apart in 4 pieces and the mounting bracket wouldn't come apart to remove the pin.

The attached picture shows the replacement (top) and the old pedal. However the old one had an extension bracket on which the ball pin is fitted, whereas the replacement had the pin fitted directly in the pedal (as shown in the manual but with the pin in the upper hole). I have transferred the bracket over but wondered if anyone knew if this was a common fitting, the parts book doesn't show it. Presumably I would have to change the linkage lengths if the bracket wasn't used?

Importantly I am mobile again, the forum really does help keep our cars on the road.

Mike
Attachments
IMAG1371.png

Post Reply