Major milestone in the restoration today - engine/gearbox reunited with the chassis/body! Whoopee!
When I bought the 'project' the prop shaft had already been removed and I haven't found the bolts. The parts catalogue lists as follows:
Yoke bolt 6-73-GB3117 x 8
Nut 6-74-GB81 x 8
Lockwasher 6-75-GB39
Does anyone know what these numbers and letters mean? I need something I can tell my local bolt supplier. FWIW the hole size appears to be 3/8"
Cheers
Michael
Please visit the Club's website https://www.dloc.org.uk/ to join. Visit https://www.dloc.org.uk/adhoc to DONATE towards the cost of the forum.
Please don't post someone's email address to avoid it being harvested by spambots and it's against GDPR regulations.
Always look at "ACTIVE TOPICS" to see all posts in date & time order as they are sometimes moved; or look at "Your Posts".
Please add Reg. nrs. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.
CHANGED YOUR EMAIL ADDRESS since registering?, click your username and check your address in User Control Panel, Profile, Account Settings.
If you want help to register, use "contact us" at page bottom for help.
Please don't post someone's email address to avoid it being harvested by spambots and it's against GDPR regulations.
Always look at "ACTIVE TOPICS" to see all posts in date & time order as they are sometimes moved; or look at "Your Posts".
Please add Reg. nrs. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.
CHANGED YOUR EMAIL ADDRESS since registering?, click your username and check your address in User Control Panel, Profile, Account Settings.
If you want help to register, use "contact us" at page bottom for help.
DJ254 prop shaft
-
- Posts: 258
- Joined: Wed Feb 10, 2016 9:15 pm
- Location: Victoria, Australia
-
- Posts: 258
- Joined: Wed Feb 10, 2016 9:15 pm
- Location: Victoria, Australia
Re: DJ254 prop shaft
And the pic
Re: DJ254 prop shaft
Hello Crossley,
I am the DJ254 Joint Registrar for DLOC in England and have not got you on the list of owners in Australia. Would you mind sending me your car details please.
Sorry I can't help you with the bolt details.
Dennis
I am the DJ254 Joint Registrar for DLOC in England and have not got you on the list of owners in Australia. Would you mind sending me your car details please.
Sorry I can't help you with the bolt details.
Dennis
-
- Posts: 258
- Joined: Wed Feb 10, 2016 9:15 pm
- Location: Victoria, Australia
Re: DJ254 prop shaft
90515 Denis, just using an alias on the interweb for security reasons.
Cheers
Michael
Cheers
Michael
Re: DJ254 prop shaft
Hi Michael
I do not know what the bolt references mean but the bolts are 3/8 UF partially threaded, 1 1/2 inches long hex head,
The nut is either a full nut 3/8 UF with an internal star lock washer or a 3/8 UF nyloc nut.
All the best
Graham
I do not know what the bolt references mean but the bolts are 3/8 UF partially threaded, 1 1/2 inches long hex head,
The nut is either a full nut 3/8 UF with an internal star lock washer or a 3/8 UF nyloc nut.
All the best
Graham
-
- Posts: 258
- Joined: Wed Feb 10, 2016 9:15 pm
- Location: Victoria, Australia
Re: DJ254 prop shaft
Thanks Graham. I thought 3/8 UNF etc. I was a bit interested as to why the catalogue would use 'code' in this instance whereas elsewhere in other applications it just says 3/8 UNF etc . So that we can understand it.
Cheers
Michael
Cheers
Michael