I have been gathering wheels to paint up for a Conquest Century I am putting back on the road and have a pile of six. Five are identical but the odd one is slightly narrower, being about 138mm across rather than about 143mm. All six are marked 4 1/2J x 15. The odd one has been assembled with round head rather than flush rivets so I am thinking that the width difference is just a production variation.
I have read that Conquest and Century wheels differed (along with the respective brake drums). Does anyone know what the difference actually was?
Please visit the Club's website https://www.dloc.org.uk/ to join. Visit https://www.dloc.org.uk/adhoc to DONATE towards the cost of the forum.
Please don't post someone's email address to avoid it being harvested by spambots and it's against GDPR regulations.
Always look at "ACTIVE TOPICS" to see all posts in date & time order as they are sometimes moved; or look at "Your Posts".
Please add Reg. nrs. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.
CHANGED YOUR EMAIL ADDRESS since registering?, click your username and check your address in User Control Panel, Profile, Account Settings.
If you want help to register, use "contact us" at page bottom for help.
Please don't post someone's email address to avoid it being harvested by spambots and it's against GDPR regulations.
Always look at "ACTIVE TOPICS" to see all posts in date & time order as they are sometimes moved; or look at "Your Posts".
Please add Reg. nrs. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.
CHANGED YOUR EMAIL ADDRESS since registering?, click your username and check your address in User Control Panel, Profile, Account Settings.
If you want help to register, use "contact us" at page bottom for help.
Conquest Wheels
- theoldman
- Extremely Wise Man
- Posts: 1110
- Joined: Mon Feb 08, 2016 2:39 pm
- Location: Bacton on Sea, Norfolk UK
Re: Conquest Wheels
Richard,
The Century wheels were deeper dished to accommodate the larger brake drums.
Neil
The Century wheels were deeper dished to accommodate the larger brake drums.
Neil
Normal for Norfolk
Re: Conquest Wheels
When you say dished I assume you mean that the middle section (where the stud holes are) on Century wheels is further out towards the outer rim than on "strict" Conquest wheels but that the rim width is the same for both. That being the case, I suppose this would effectively reduce the track of the Century cars by a corresponding amount (x2)?
- theoldman
- Extremely Wise Man
- Posts: 1110
- Joined: Mon Feb 08, 2016 2:39 pm
- Location: Bacton on Sea, Norfolk UK
Re: Conquest Wheels
Not quite, Richard, I may not have explained myself too well!! The centre section (with the stud holes) is the same relative distance from the rim, it is just a lot bigger to accept the larger drum, ie, the circumference of the dished bit is larger than that of the Conquest wheels
You can quite happily fit Century wheels to the "strict" Conquest, but not vice - versa. You will soon find out if your "odd" wheel is a Conquest in that it won't go over the drum!
The track remains unchanged.
Hope this helps
Neil
You can quite happily fit Century wheels to the "strict" Conquest, but not vice - versa. You will soon find out if your "odd" wheel is a Conquest in that it won't go over the drum!
The track remains unchanged.
Hope this helps
Neil
Normal for Norfolk