Forum registration by users has been re-enabled with harder registration questions. Guests should use the Register button top right but if you have difficulty answering one of the spambot countermeasure questions, Email mail @ chalkevalley.info (delete spaces).
If you would like to join the DLOC, please visit the Club's website https://www.dloc.org.uk/
Please don't post someone's email address. Some people don't want to risk it being harvested by spambots and GDPR regulations discourage it.
Always look at "ACTIVE TOPICS" which gives all posts in date & time order if you can't find a post or "Your Posts", as topics are sometimes moved.
Reg. nrs. Please add reg. nr. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.

1957 Conquest Century MK2

Post Reply
AlbertHamilton
Posts: 21
Joined: Mon Jul 04, 2016 1:25 pm
Location: Telford Shropshire

1957 Conquest Century MK2

Post by AlbertHamilton » Sun Aug 11, 2019 5:49 pm

Wanted Urgent Conquest century MK2 Exhaust Manifold, If anyone has one for sale, or knows where one can be purchased. Thank You in antisipation

classiclife
Posts: 434
Joined: Wed Sep 05, 2018 9:55 am
Location: Ridgewood - East Sussex
Contact:

Re: 1957 Conquest Century MK2

Post by classiclife » Sun Aug 11, 2019 6:22 pm

Hello.

I posted this a few weeks ago and maybe useful.

A chap by the name of Roy selling a large number of spares for the above vehicle - he can be contacted on 01246.822.269 - Chesterfield.

I do not know the gent, saw the advert in CMM and passing the info on.

Good luck.

Richard.
1968 Daimler V8-250 Saloon
DLOC East Sussex Area Representative.

Southern Classics Society Events Co-ordinator.
www.southernclassics.org.uk

AlbertHamilton
Posts: 21
Joined: Mon Jul 04, 2016 1:25 pm
Location: Telford Shropshire

1957 conquest century mk2 exhaust manifold

Post by AlbertHamilton » Mon Aug 12, 2019 1:35 pm

Does any member know where I can get exhaust manifold for my century,. or does any member have one for sale. TY in anticipation A Hamilton

classiclife
Posts: 434
Joined: Wed Sep 05, 2018 9:55 am
Location: Ridgewood - East Sussex
Contact:

Re: 1957 conquest century mk2 exhaust manifold

Post by classiclife » Mon Aug 12, 2019 4:02 pm

I note you have posted this twice now in less than 24hrs, on the first occasion I gave a response - I presume the seller has been unable to assist ??

Regards.

Richard.

[Topics merged to avoid confusion -John-B]
1968 Daimler V8-250 Saloon
DLOC East Sussex Area Representative.

Southern Classics Society Events Co-ordinator.
www.southernclassics.org.uk

bakergh
Posts: 69
Joined: Wed Feb 24, 2016 1:57 pm
Location: New Forest, Hampshire

Re: 1957 Conquest Century MK2

Post by bakergh » Tue Aug 13, 2019 8:56 am

Hi Albert
I think you need to be more specific as to what you need.
The Conquest Century engine has two exhaust manifolds, a front one and a rear one. These are both castings but are different so we would need to know which one you need if the problem is actually one of the castings.
The two manifolds connect to a y pipe the first part of the exhaust system which has a flexible pipe in the front part of the y. This is prone to failure.
Could you please let us know which of the three parts you actually require so that we might advise you further.
Graham

chrisb
Posts: 20
Joined: Sat Feb 20, 2016 8:56 am
Location: Harlington, Beds

Re: 1957 Conquest Century MK2

Post by chrisb » Tue Aug 13, 2019 9:55 am

Hi
I have half of an exhaust manifold. Y shaped, left side 2 port and right side 1 port as viewed looking at the block. Suspect that it is front half. I can email photos if needed.
Chrisb

AlbertHamilton
Posts: 21
Joined: Mon Jul 04, 2016 1:25 pm
Location: Telford Shropshire

Re: 1957 Conquest Century MK2

Post by AlbertHamilton » Tue Aug 13, 2019 2:58 pm

Dear Classiclife, I wish to thank you for your info regards exhaust manifold, I got in touch with the gent you mentioned and plan to visit him this week-end, I pray he has what i want. Thank you very much Sir. Albert

AlbertHamilton
Posts: 21
Joined: Mon Jul 04, 2016 1:25 pm
Location: Telford Shropshire

Re: 1957 Conquest Century MK2

Post by AlbertHamilton » Tue Aug 13, 2019 3:06 pm

Dear Chrisb, Thank you for your reply to my post, I am going to see a gent about the exhaust manifold, he said he has one, im hoping its the right one.if not I will get in touch with you again if that's OK, In the mean time will you post pics of what you have with a view of my purchasing yours. Please Oblige A Hamilton

classiclife
Posts: 434
Joined: Wed Sep 05, 2018 9:55 am
Location: Ridgewood - East Sussex
Contact:

Re: 1957 Conquest Century MK2

Post by classiclife » Tue Aug 13, 2019 3:23 pm

Hello Albert,

Fingers crossed and good luck; I am sure "we" will be interested to hear how it pans out.

All the best.

Richard.
1968 Daimler V8-250 Saloon
DLOC East Sussex Area Representative.

Southern Classics Society Events Co-ordinator.
www.southernclassics.org.uk

Post Reply